-
Content Count
2479 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by turbo Grant
-
-
Stock front bumper?
-
Or you have a nice breath on top of the box that works well
-
Tighten in 3 stages up to 60flb or 81nm for arp's and doesn't matter what gasket you use
-
I'm sure toyota will be more than happy to pull your pants down for a new one.
-
You need to do some more bleeding if pedals not hard
-
-
I've used 16v 4age uprated ones fine. Or I've used bga one from a local motor factor. Cost £8 for the set and worked same as the uprated 4age ones lol
-
Look at honda crm250's, I've got a mk3 import and it does me so well. The bikes are getting old now but they are so fucking reliable. Can't beat ringing a 2-stroke down a track
-
Time it up with the 4e marks. Only about half a tooth between the 2 marks. But you need to time the engine to tdc. The remove the cam pully and refit on 4e marks.
-
-
Stick me on
-
Non abs?
-
The cat flanges are the same
-
Coming along nice now
-
Careful preparation to the area and you won't get a single bit of swarf in the engine. Taking the head of sounds a bit extream just to sort one bolt out.
-
Heli-coil and you will be stronger than standard
-
Look a bit like volks. Got the same inner markings as the 18" set of volks shorty kindly left at mine to clutter the hallway!
-
Uk paseo definatly has drums. Discs and calipers off GT or v with bolt straight on. You need the caliper hanger as well. Hand brake cable might be an issue as the beams longer on the paseo from memory
-
Looks like it's grinding your gears!
-
Username: turbo grant
Hobbies: cars, bikes, welding and bdsm
Favourite colour: orange
Favourite mod for starlet: Doobie kit
Dislike: people not sharing gf's
So who wants to revive a used dildo?
-
I would get a small one for the arb link. Just lubricate the nut up as lye like to snap if been on a while
-
It's on the front of the engine gear box side. 1 wire connector. The oil pressure relief valve is inside the sump
-
Something like this. You can get the c cups on Differnt sizes
eBay number
251355721707
-
Would C cups do what your after? I use them for pulling gears off.
Akyakapotter's Forged Glanza V
in EP91 Glanza Progress Blogs
Posted
But td won't want to make a mess on there dyno. Be good to see how far they will push it.