Jamie1st

I assume you mean glanza s?

Toyota still sell them

What's the rough price on one if those, you know?

I have one, not sure how many pins. I'll PM you on Wednesday

Thanks

Hi,

I'm after a Throttle body and TPS from an automatic 4efte, or I believe there are some 5e,s that also use the 4 pin TPS?

Basically has to have the 4 pin TPS on it. (can swap for a manual 4efte TB/TPS if needed)

Thanks

Got a few on mine 'jamie1st'

Fuck it, as long as he had fun lol.

You serious???!

Does make me sick thinking about the man.

I rebuilt my engine and did this, if you're replacing the gasket because it has blown though then I'd say it needs machining to prevent it happening again.

If the head has been skimmed and new bolts fitted and torqued down correctly then you must have a warped block.

How are you cleaning the block up before placing the new gasket on?

Agreed

It will be a stinger pressure plate than standard. Paddle has nothing to do sign how heavy the clutch is, it's all in the pressure plate. Weaker ones have 2 straps, most up rated have 3 straps, so essentially 50 % stronger.

I put a 2 strap in once, was fine but couldn't handle my double clutching and bent

Cadwell

I'd guess Toyota only dude, but I could be wrong. They are sometimes decent on the price, other times a rip off lol

Would love this for the mrs, don't think she could afford to get rid of her 50mpg 206 hdi though :/

I'll stick to the setup that I've tried, and been happy with oil cooler, low temp stat, triple core rad.

Water and oil fed turbo

You called me on a Sunday afternoon, (if I remember correctly) shouting the odds and saying things you probably wouldn't say in person.

Obviously there was nothing I could do to help you at the time, so told you to calm down and send the manifold back the following day.

I didn't say it was to be expected, I said it sounded like you had a high EGT problem, and I wouldn't recommend running a TD04 at high boost for extended periods on track.

You declined my offer, did you carry on using the manifold?

I would have defiantly said the same things if you were there, prob more so!? I was 200miles from home with a wastegate hanging off, of course I would be pissed off.

You said to me 'ahh yeah, I bet your car isn't mapped is it' which is what you said to me the first time it happened. To which I replied, 'yes it is, EMU by Tuning Developments'

This is when you asked me what boost and bhp, I told you (1.4bar @ 272bhp), you then said 'well you're at the limit of out kit, and it's not designed to be pushed for that period of time at that boost'

To which I thought was completely false advertising is it's rated at 280bhp. Should be rated to 1 bar, and can withstand short periods or 1.4 lol.

(Don't take it word for word, but that was the general way the convo went)

No I didn't send it to you, as it's a ball ache sending it off and having it repaired every other track day. I've since fitted extra bracing and it's not too bad.

same here, if it the silver gt in the picture, why on earth would you let it go

bit of paint at some stage and no more gazebos and boom sorted

Phil

Can't beat silver GT's, not many about! Unlike Glanza's haha

Just read you asked what needs doing lol

I was going to re bush the lower arms front and back I have them all here (poly bushes)

Was going to paint all arms and underseal the whole car..

Then I was going to send it off to tuning developments for stage 2 and td05 setup

There's not a lot to do to the car, but now it's scratched on the roof and boot

If you're serious about getting rid, PM me and might come to some deal?

However, I'd sooner you crack on and get it done!!

Cook a td04 pay 40-50 cook an engine (standard) 10x that! I've never ran waters even on my expensive and rare KKK K24, never had any problems, it just throws extra heat into the engine!

Surely if your cooling system is doing its job correctly it will always maintain the temperature to where is should be?

Cant speak for why that would be... Maybe he didn't like your attitude, slagging off his manifolds?

Altho, you could have fixed your high EGTs with EMB, Standalone is night and day Jamie I look forward to seeing it go!

I can't fault him, I'd be the same other way round. Just didn't like the fact when I spoke to him on the phone at the side of the track with my wastegate hanging off, that apparently it was to be expected as they are only rated to 280bhp for short periods of time, not a full track session hahaha!

Funny now, but pissed me off at the time so the conversation did get a little heated!

Yeah can't wait for it to be done now!

Your issue isn't the manifold...

kidV's RW-Dev Manifold Cracked...?

However, Dean repaired it for free... Within 12hours...

If your EGT's are too high, ANY manifold will crack Jamie...

Ha, made me smile

Don't expect it to last is all im saying!

There ok to get u started tho!

Maybe so, in the process of stand alone management though so we'll see how that goes.

I didn't like Ricky's attitude, maybe that's why I have such I bad opinion on the company

http://www.mkivsupra.net/vbb/showthread.php?280959-Legal-Action-threat-from-Future-Motorsports-and-Bijal-of-Future-Motorsports

You say that, but there's a lot of car/race companies coming from all over the UK to have mapped by Bijal. Latest one is the UK's fasted N/A ep3 k20. I'll report back when my car is done

Thanks for the comments lads, really makes it all worth it with positive feed back

Handling mods consist of:

Meister R coilovers

White line RARB

Quaife LSD

Strut braces and C-Pillar braces

Next on the list will be:

White line front ARB

Anti Lift Kit

Chassis Bracing

Full weld in cage and possibly seam welding.

I will probably be going in august again but it might be quiet in may. Sounds like you have the same luckk as me dont think I have ever had a clear lap ha. Good luck anyway and let me know what you think the place (the hills and the whole area)and see of anybody knows what your car is because there was porsches etc everywhere and I had people asking me what it was ha

My original jap wheels fit just nothing else until I bought them.

I will do dude! Looking forward to it!

Get in touch when you're next on a track day or something and I'll get mine out!

buy cheap buy twice!

Haha, I wish I could agree, however my Racetech one is shocking and ended my track days several times!!

If you've got abit more money to play with, get onto Dean @ RW Developments. He's based in Lichfield

Cheers dude, I'm from Nuneaton, I'm stopping with the project now and the cars going up for sale,

Lost the love for it..

My gazebo blew over this morning and it has scratched the roof and bootlid..

Going to buy a glanza instead

Dude, don't give up! I can pop over and give you a hand getting the bolt out as I'm only in Leicester! What's needed to be done, project wise?

Could possibly take it off your hands if you really don't want it no more....

Welcome! Didn't spot a starlet when I was in the Dam a few months back!

I think they are 'Roy's Rolls'