H_D

steel ones

yes they can, they are for the air con iirc

Even with the 10cc dished wossner pistons your compression should be a lot higher 135psi

im running 75mm wossner pistons, pec rods with a 1.4mm Athena head gasket and my compression is 170 across all 4 cylinders - 135-130 seems rather low

got a mirror polished rocker cover with an10 fittings - polished to perfection msg me if needed

if you go to Amsterdam central find a street called harlemstraat there is always a few GTs parked up there. I see them every year.

thanks for all the replies guys.

Much appreciated

Which tf035 are people running? I am currently looking for one but the ones I have come across so far have come off a diesel engine. what should I be looking for?

any help will be much appreciated as always.

Thanks

Best bet is to get on the forester facebook page. Starleteers seem to add a premium to them when selling on here. I got offered three on a fb group £50-£70

Thanks mate. I will give that a go.

As above - needed asap.

please PM me.

thanks

Should have a 3" one will check and let you know

Cheers mate.

as above.

thanks

hammerite underbody seal is what I used 6 years ago and its still mint today. just apply generous amounts with a paintbrush removing any visible corrosion with sandpaper or small brass wire brush

also disconnect the battery

got an arc intercooler here - 2 of the mounting brackets have broke of but still mounts securely and works as it should.

pm me if you are interested

Thats the throttle cable

Can anyone tell if this is a turbo gearbox?

block it off from the inlet

Yh good mate will send you some pics just main bits need doing now gearbox and engine everything else is done how's yours is the beast out for the summer

Yep its on road for the summer, trying out a whole new setup. not chasing stupid BHP figures, full street set up with minimal lag

Cheers h_d hope you're well

All good Bro. how is the car coming along?

bring it down to my workshop next time you are in Leicester

all main dealer parts iirc

Whos that with mate

General accident

Im paying £550 fully comp for my V all mods declared. 3 years ncb with general accident and valued at £6k

Would it make a difference if you used some engine flush to clean it out or would it still affect it?

if you flush the engine just make sure you remove the sump after the flush and clean the oil pickup as flushing causes the oil pick up to get blocked up which will lead to oil starvation and total engine failure

if you use magnatec you need to stick to that oil and not change brands after. as it causes problems when mixed with other brands, I was told this a good few years ago. I think it affects viscosity