liamg40

£450 delivered to Birmingham?????

I haven't got anything g around me at the moment to do that, I'm gonna get another one I think and try that, Cheers.

Yeah that's how it felt when I installed it the first time at 123mm, pretty hard to pull it over on to the pin. But anyway I've just put the standard one back on and it's straight back to the way it was before, I'm back to a steady 0.65, it's not rising or dropping at all on full boost so it's got to be a faulty actuator. Gutted I'm all ready to turn the boost up now for more power! Anyone got a working pin type actuator for sale?

Oh right, I'm baffled again now, I'm gonna double check everything now and put the old one back on and see what happens, Cheers mate.

Just checked the tension on the standard actuator and there is a massive difference between the two! The hks arm is a lot harder to pull out! At least three times harder than the standard one, It's seems quite obvious that this is my problem, Will it be ok to douse it in wd40 a few times? I'm assuming it will be but I'd rather be certain incase I ruin it by not doing my research, Cheers.

Cheers for that mate, but that link just shows you how to set the boost and install the actuator which I am already familiar with, It's looking like it's a faulty actuator, I'll know in the morning g when I put the old one back on. Cheers.

Yes mate, single loop from actuator to turbo, it's leading me to think the actuator is faulty now because it's behaving exactly the same with vacuum hose connected or not connected.

Just got it off and the arm seems ok, I can pull the arm out by hand and there's plenty of tension pulling it back in again, Confused now, I'll crack on in the morning now, cheers.

Could it be the actuator arm that's stuck causing the wastegate not to open? I'm gonna go out now before it gets Dark and see if I can move it manually with my pliers.

I know mate, my posts explain that it's over boosting so naturally I would be trying to turn it down by winding it out more,

I'm gonna put the old standard one back on and see what it's like, I've wound the adjustable one out that far now it's not even starting to boost until over 3.5k revs but still massively over boosts when it hits full boost. Dont know what's going on so I'm gonna put the standard one back on and go from there, Cheers for the help lads.

Cheers mate, it must be the wastegate spring then because when the actuator is un bolted I can open and shut the wastegate very easy infact it just wobbles about when I touch it.

Could the waste gate spring be knackered?? I've just checked the arm that bolts to the actuator arm and there is no tension at all, it moves side to side very easily, Is this normal? Any help appreciated.

Just got round to fitting a hks adjustable actuator bought second hand off this forum. Pre set the arm to 123mm to achieve 0.8 boost (correct me if that's wrong) Took it out for a quick test drive and tried it out and the boost nearly went off the dial! (Very briefly of course) I've wound it down four times now one turn at a time and it's still the same, boosting its head off. It boosted just fine on the standard one at 0.65, can these actuators fail or is it me that's failed epically trying to fit it? Also is the little vac hose supposed to run to the turbo or to atmosphere?

As above, cash waiting at the right price.

As above, Does anyone know what size and angle silicone elbow I need to fit the rx7 intercooler, Advice appreciated.

^^^ funny!!

Haha, aallergic to peanuts. Should of been a bit easy on the old !!!. Still a shit car though.

Haha, aallergic to peanuts. Should of been a bit easy on the old !!!. Still a shit car though.

Some people chat shit!!! The cars crap! Simple. I approached a Subaru the other day in sainsburys car park and asked his spec only for him to reply, it's not a turbo mate it's a replica. I just wanted to slap him there an then for owning a pointless car!! That's why it's crap!

Seen this afternoon, I was shouting out the window of my misuses civic to get your attention, lol. Looked in very good condish!!

Ooh shit!! I imagine the owner is a complete twonk!!!

Haha!! You've just described me to a T. But wasn't me I'm afraid.

It says no swaps in his advert mate.

Feel like selling both of my glanzas now aswell lol!!, Need this in my life!!