Tara

John asked for a refund after you, you requested a refund at 7:44pm on the 19th, John posted after you at about 8pm I believe, the fuel rail thread had started to get out of control early afternoon on the 19th when Lew91 decided that because someone had posted up pictures with a ruler claiming the mounting holes were in the wrong place(which is incorrect as the measurements were being taken from the edge of the injector holes not the centre)that he was not going to provide me with the information I'd asked for

just seen the harnesses bit, if you have no seat belts or isofix then you won't be able to fit a seat, it is a legal requirement for all children to travel in the correct seat for their weight/height until they are 12 years old or 135cm tall which ever comes sooner

Safest place for children under 12 is the back seat, there's no definite age for front seat if their car seat will fit(and I think you'll struggle to get anything to fit with bucket seats) If you have an active passenger airbag you cannot use a rearward facing child seat on that seat as if the airbag deploys it will cause serious harm. Forward facing seats in a passenger seat with an airbag aren't great either as the force that an airbag deploys with can cause injury to a child. This page gives information on the laws http://www.childcarseats.org.uk/law/index.htm If your child is in a

There seems to be some confusion here, at this time the fuel rail issue is being investigated which was stated in the thread before it got out of hand, so far we've had confirmation that 2 rails have tried to be fitted, one of those was fitted with no issues and is running(awaiting more information from this customer) the other had issues, we were awaiting information from that customer but this information has still yet to be given. Again as stated in the original thread we are waiting to test fit a selection of the fuel rails to a running engine which will hopefully happen early next week.

Because we were trying to deal with the issue and get a resolution, Lew91 refused to cooperate, people who hadn't even bought a fuel rail decided to pipe up with every single minor issue they had ever had with us, most of these issues were where we had offered a resolution and they had accepted, so why bring it up? Then people complaining about stuff that had happened months ago but they'd never even told us about it. That thread should have been locked whilst we worked on a resolution and prevented all of this. Then people making up fake accounts and posting libelous statements, making thre

So you weren't sorry at all then? Iamlegend, James was no longer a trader at the time that message was sent, he gave up his trader status on the 20th March at 12pm

The threats on that thread were not the only ones made, there were several others made privately Phil, I'll chase it up for you

Asad, we ourselves weren't even aware that people were still having pulley issues, Shorty for example had never contacted us to say there was a continuing issue after being machined and we'd had feedback from others that has been machined to say they were spot on. Communication issues did arise after I became ill last year which meant James' time became very stretched, it was something we were trying to deal with by asking Ryan Lang to help out.

When you have children of your own you come back and tell me if you'd of reacted differently if someone had threatened to 'come and get' them whilst you slept!!!!!!!! I'm answering PM's as quickly as I can, can I please remind people I need the paypal transaction ID to find your payment as stated by Socks in the original post. Phil have you not received your pulley?

Hi, there are a lot of people now running the re-machined pulley that came from the first batch(including a member of admin) you were advised to look in to having it machined local to you due to your location being overseas. You advised us it would cost you in excess of £100 in machining to have it done by your engine builder and we asked if there were any other way of having it machined by someone else as that price seemed rather high considering we pay only a few pounds locally as it can be done by any machine shop with a lathe as it's a very simple adjustment. If you would like to discuss

^^^ If that is ok with the admin team?

Hi John, That is the process that would have been followed once we had ruled out the more basic things that could have been at fault with the rail i.e the spacers but we were still waiting for that information. I am in no way trying to say we are blameless in this at all, just trying to understand why our treatment has been so different to other traders. Did you get my PM from the 20th? As I haven't had a reply and also in that message I asked you to deal with me and let James calm down but you made several attempts to contact him via facebook yesterday(the 21st)

Steve the thread was in the lifestyle general section where neither myself nor James have/had moderation rights, the thread was started on the 15th and closed by Socks on the 20th, more than 1 moderator posted on the thread. Our issue is that previously when other traders have had an issue like this the threads have been locked much quicker and help offered to mediate with the customer to come to a resolution, just would like to know why that didn't happen this time. When someone gets a chance could they forward me a copy of the trader rules/guidelines as I can no longer access the trading

Steve, I believe it was the thread about the fuel rails that was ongoing for several days whilst we were waiting for some details from Lewis and awaiting another test fitment of the rails here before deciding on next steps. I know previously threads like these were locked to give the trader a chance to complete their promised actions. Clutches are still going ahead as already completed

Refunds will be processed for the anti lift kits as soon as funds are available, we are still waiting for confirmation from the supplier as to whether they will cancel the order, even if they do we will be out of pocket for the moulding costs so will have to refund people in the order they paid as funds become available

You did offend me Lewis, greatly, threatening to turn up at my family home whilst me and my 3 children slept with a convoy of people was completely out of order. Daz I will get clarification on the warranty issue for you and update asap

We haven't stocked the type that came in the lime green for quite some time now(1 year+?) The green was one of the most popular colours so there might be some sets around second hand. As far as I know no one else does green ignition leads

Haven't had chance to read through all replies yet(had about an hours sleep and currently waiting for painkillers to kick in) will try and update later today Lew91, I still haven't got a pm from you yet with pictures and measurements?

I'll have to contact suppliers today and try and get this cancelled completely then and get refunded back what we can as we will lose out on the mould costs, will then sort out refunds for everyone

Yes, if you've got a converter fitted you need the 180mph dials, the 110mph dials will only work without a converter

We were going to do that this afternoon as Owain(enots) is here working on his wide arch GT but he has no fuel reg so couldn't do it today, will pick one up and get a video asap(bear in mind both James and Owain work full time so getting a day when they are both off might not happen until the weekend)

What do you mean shut? Just fitted another one up now will get some pictures up, we've had at least one customer who has confirmed they have fitted theirs and run the car with no issues, this is the only contact we've had with issues and are still awaiting the information to confirm if it is the spacer height that is causing the issue(as the height of the spacer will affect the angle the rail sits at which will affect how the mounting holes line up which can affect the way the injectors sit which will mean they don't seal correctly)

So you've already got a converter fitted so your original clocks now read in mph instead of kph? But the dials you have are the ones that go up to 110mph(so will read the correct mph with original non-converted kph clocks) Our dials would work with your set up, they come with both mph and kph faces both up to 180, so require you to have a converter fitted already if you want to use the mph face

So it's getting the right angle so the injectors sit in properly? This was the issue we had with the original sample and was why we had to alter the design which caused delays with getting them here. Slight discrepancies on each head mean the angle is ever so slightly different on each car, we test fitted on 5 different heads here(all with slight differing angles of fitment) and the range of angle for fitment was more than sufficient on those. When you say it's blowing fuel from the injectors is it the head side or the rail side?