melon

No, cant find anything about this kind of thing anywhere . I'm sure its something small and stupid somewhere along the line, but I can't spot it Really reluctant to take the car anywhere to get it sorted but looking like I need someone with a bigger brain than me

Definetly no fcd mate, the car has been built from a shell No I don't have one Amjad. Its next thing to go on the car.. just want it all right before I start spending serious pennies

No other mods too. Athena hg, paseo bolts(drilling issue), sparks, ignitors etc etc you know the score Putting money aside for emb, rather not use a fcd, but would rather sort whatever the issue is before I get to this stage and throw a load of money away

^^ its already this Only other thought is that the paint shop butchered a load of wiring early this year, can't see any damage but should maybe replace these too?

Mods should support this? ECU is next on the list, like everyone else its an ongoing project. I turned it up purely for test (thats why its back down again now) but surely even without the ecu it should hit cut? Thanks for help, don't know much about fueling

Jam mani, fuel pump as mentioned above and fpr mentioned above were on. Gone back to a ct9 mani now its turned back down, but want to be able to turn it up and run safely. Will look into a rolling road

In need of some help because im running out of ideas fast.... Running 1 bar boost (standard ecu, engine, ct9) on my GT and never hit fuel cut & have no fcd. Bought a new map sensor last year, have tried a different one since and all diagnostics tests are coming back showing no error codes. Fuel pressure is 3 bar 45psi so should be right and not rich/lean? Turned the car down to 0.6bar and 2.6(ish) on fuel because im on another fresh engine and will give up if it shits itself again. Built the car from a shell so pretty sure of whats under the bonnet and all replaceable parts are new. Is it worth my while to put a wideband on and check the ratios? Or is there something else amiss here that im missing? Doesn't seem to be common issue? Only other thought is that the boost gauge is lying? But I've tried another one and replaced all wiring Car that doesn't want to stop

Yeah im on polys. It sounds more like liquid flowing strange than a vibration, will check bolts though

My fuel tank is making a strange rumbly noise when on idle, as soon as I put some revs on it goes away. Had a new fuel pump about 8 months ago, does it sound like its just loose or could this be another issue? Can't see how there could be anything except fuel in the actual tank Cheers!

Cheers guys, will get a new one

Yeah, seems to be getting power fine. Only thing I can think to be affecting it is that its in the boot- but should still be charging :s lol Will nip down and get one this evening. Might see if the place I got this one from will change it

Do Halfords warranty them still?

I have a trickle charger and the battery is left on it when the cars not being run. If the cars stood for two days then its flat on its arse. Needs more than 4 hours driving to get it to restart after 30 mins of being turned off- and the alternator is pretty much new. I have an amp (i think... lol) will try unplugging it and see if it makes any difference and will grab a Bosch if not- thanks!

What batterys are people running in their GTs? Mine is always flat.. to the point where I don't dare go out anywhere, and its less than 2 years old. Think my alarm uses a lot on it, but was only a cheap £50 battery. Sorry if this is in the wrong section?

AET Turbo do them

Received stuff quickly, packaged well. Buying from him again right now

As above white rims, green tow strap Plate finishing SWR

Might come down to give the new turbo a blast They still anal about noise blah blah blah?

From Leeds so you're only 40 mins away Think there's a few from round West Yorkshire knocking about

Letting the yorkshire side down... Tut!

I just had the coating/wrap put on after a paint job, was around £350 to have it on my bonnet, bumper, wings and mirrors I agree that the bra's are gay, but I'm having one made for track days. If you get one the same colour as your paint it shouldnt be too obvious (I hope!)?

copy and paste doesnt work either for me

Ha yeah, I didn't see anything about temps Looks like condensations above ^^

Disagree mate. I had a pretty clean stick when I blew my head. Depends if you're keeping oil topped up and oil & water will seperate if its been sat so wont always see it. Just what happened to me anyway. Also be careful that its not the head if you're taking it out for a boosty drive... don't warp your block

I'll come if my stuff turns up in time