Jump to content

pacman

Member
  • Content Count

    194
  • Joined

  • Last visited

Everything posted by pacman

  1. pacman

    MR2

    I have a rev 1 turbo and absolutely love it
  2. Sold items removed, Gearbox, clutch and flywheel added. 27mm nuts on the rad, 15mm internal pipe bore You have pm
  3. http://www.bosch-motorsport.de/pdf/sensors/lambda/LSU49.pdf That's a bosch pdf. Page 3 gives installation hints and one of these is "Install at a point where the gas is as hot as possible." Bare in mind the maximum temperature that the probe above should reach is 1030°C (which is a post turbo temp, pre turbo would likely be 100/150°C higher) and if you're often running over 1000°C post turbo something else will probably fail before the lambda does. Guess it all depends on the make and model of the probe.
  4. http://shialabeowulf.tumblr.com/post/33670447154/99-life-hacks-to-make-your-life-easier
  5. So are we talking metric or imperial? 36 inches away from the turbo will be nowhere near the downpipe; it'll be somewhere in the exhaust system. Personally I can't see the problem with the lambda being closer as, and correct me if I'm wrong, the factory lambda probe is right next to the turbo outlet on most aftermarket downpipes.
  6. http://www.thepoke.co.uk/2013/04/26/unfortunate-publishing-layouts-of-our-time/
  7. Turbo kit and stem seals sold. Open to sensible offers.
  8. This is called hydrographics and is something I've looked into doing. There's tons of videos on youtube about it
  9. I have spings but not wind deflectors. They sold last week and thanks to a heavy handed postman they broke in transit. I think they tried to bend them even though they were extremely well protected.
  10. You have PM but why is it reading 0.2 bar with no pressure pipe connected?
  11. I can offer you a half eaten bacon sandwich and £3.72. It's organically farmed bacon.
×
×
  • Create New...