SpikeyJp_68 Posted May 17, 2016 Share Posted May 17, 2016 Hi guys, just wondering if it would be possible to get a standard ct9 and modify it to accept a td04 ? Or is there any cheaper alternatives than wepr ect. ? Would love a wepr one as everyone says the best you can get just they're a pretty penny any help welcome Quote Link to post Share on other sites
adzy Posted May 18, 2016 Share Posted May 18, 2016 You can get a ct9 adapter kit, not sure who makes them new but have seen a few 2nd hand ones recently. If your still using the standard mani I would just buy a td04 kit if that's what you want to run. The adapter kits are only worthwhile if you have a good aftermarket ct9 mani imo Quote Link to post Share on other sites
starletezy Posted May 18, 2016 Share Posted May 18, 2016 RW Developments makes ct9 to td04 adaptors mate it is the cheaper route yes Quote Link to post Share on other sites
SpikeyJp_68 Posted May 18, 2016 Author Share Posted May 18, 2016 Cheers guys, I would be porting the ct9 mani also. I might wait a while and get a proper td04 mani as I'm in no rush. What's the going rate roughly for a 2nd hand mild steel td04 mani ? Quote Link to post Share on other sites
StuDoc 72 Posted May 18, 2016 Share Posted May 18, 2016 Wouldnt waste your money if your planning on using the standard mani. Quote Link to post Share on other sites
starletezy Posted May 18, 2016 Share Posted May 18, 2016 I would get a better manifold mate the flow of the standard manifold is restrictive even with the ports cut out and polished Quote Link to post Share on other sites
SpikeyJp_68 Posted May 18, 2016 Author Share Posted May 18, 2016 Aftermarket manifold it is was thinking ramshorn ? Quote Link to post Share on other sites
StuDoc 72 Posted May 18, 2016 Share Posted May 18, 2016 Yes go with WEPR dont buy one off ebay you will regret it. Quote Link to post Share on other sites
Starlet__SR Posted May 18, 2016 Share Posted May 18, 2016 Do it right, do it once. Quote Link to post Share on other sites
SpikeyJp_68 Posted May 18, 2016 Author Share Posted May 18, 2016 What's the going rate for a decent 2nd hand wepr mani ? They're very expensive new.. Quote Link to post Share on other sites
starletezy Posted May 18, 2016 Share Posted May 18, 2016 Depends what WEPR manifold it is. Best thing to do is give Sacha at WEPR an message his very helpful might be able to get a deal on an complete kit or just manifold Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.