aleximport25 Posted July 12, 2016 Share Posted July 12, 2016 hey all, recently my v has been over boosting quiet a lot, nothing has been altered but she trying to boost upto 1.2 bar when it used to boost to 0.7 . ive tried turning the duty down on my ebc but that has made very little difference, i cant see any black residue from an exhaust leak on the mani decat and wastegate.the wastegate had a replacement diaphram a couple of months ago.thanks in advancealex Quote Link to post Share on other sites
Broony Posted July 12, 2016 Share Posted July 12, 2016 internally gated? Waste gate or actuator. Theres loads of info on how to check if its mechanical or electrical boost creep on google. I'd check the electrical side first then mechanical. then you know which side is causing the issue. Quote Link to post Share on other sites
aleximport25 Posted July 12, 2016 Author Share Posted July 12, 2016 externally gated buddy, awesome ill give it a google cheers dude Quote Link to post Share on other sites
Broony Posted July 12, 2016 Share Posted July 12, 2016 It should be easier to diagnose with it being externally gated. No splits on you VAC lines? Either the waste gate is stuck shut/ not functioning and not letting exhaust gases by pass the turbo or you boost controller/vac leak is bleeding off pressure causing over boost Quote Link to post Share on other sites
aleximport25 Posted July 12, 2016 Author Share Posted July 12, 2016 all the vac lines for the ewg and ebc was replaced when fitting the manifold a few months back, ive also noticed that boost isnt as smooth and comes in 500 rpm later, under boost the cars started feeling lumpy too. Quote Link to post Share on other sites
dan106 Posted July 12, 2016 Share Posted July 12, 2016 What spring you got in the wastegate dude? Might be worth trying it just on spring pressure to see if it's the boost controller Sent from my iPhone using Tapatalk Quote Link to post Share on other sites
aleximport25 Posted July 12, 2016 Author Share Posted July 12, 2016 im not 100% tbh dude, ill give it a go see what happens, i know people have had issues with their GFB EBC's needing re-calibrating so i might try that as well. Quote Link to post Share on other sites
gorganl2000 Posted July 13, 2016 Share Posted July 13, 2016 maybe completely bypass the ebc and just use wastegate pressure and see what happens if there are still problems then take apart the wastegate and check to see if the piston is seating/closing properly or the diaphragm is damaged again if all is well with the WG, then move to the ebc, double check settings and lines...you sure all the hoses were hooked up at the correct places? Quote Link to post Share on other sites
StanMan Posted July 15, 2016 Share Posted July 15, 2016 I have just done a FMIC (HDI) and had to adjust the dump valve screw (Blitz SS). Took it out for a test run (20 miles) was fine. Went to a mates house and started to drive home and gave it the beans to see how it felt. Looked up at boost gauge, holy crap.....Said I was running 1.5 bar. Let off instantly and got chatter. I was close to home luckily. Turns out the grub screw fell out of my dump valve and was stopping the dump valve from opening due to VAC pressure. I'm still running stock ECU so hopefully no damage done....Hopefully. Quote Link to post Share on other sites
aleximport25 Posted July 16, 2016 Author Share Posted July 16, 2016 maybe completely bypass the ebc and just use wastegate pressure and see what happens if there are still problems then take apart the wastegate and check to see if the piston is seating/closing properly or the diaphragm is damaged again if all is well with the WG, then move to the ebc, double check settings and lines...you sure all the hoses were hooked up at the correct places?I've not had chance to look at it yet but I'll try it on Spring pressure see what happens, it just seems strange how I've not changed anything and it just happened all of a sudden, I'll have a snoop around this weekend see what I can find, could a kink in the silicon hoses cause the issue ? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.