Chops Posted July 20, 2016 Share Posted July 20, 2016 (edited) This has turned into a sort of shop thread now lol, ive always loads of parts for sale! take a look!Item For Sale: anodised red oil catch canItem Condition & Description: an anodised catch can in red. Its been used, i cant even remember where i got it from tbh its been sat around in my garage for a long time now, its had a hole drilled in the top, i havnt had time as of writing this but ill tap a thread into it before it goes so it can be blanked or have a filter mounted on top.Price: 10Pictures:Payment & Shipping Details: to be discussed with a buyer!Item For Sale: stock 4efte camsItem Condition & Description: Stock cams, one has a bit of surface rust one one cam lobe, would probably be fine to just throw in, certianly wouldn't take much polishing to remove.Price: 25Pictures:Payment & Shipping Details: to be discussed.Item For Sale: ep82 door, blackItem Condition & Description: this is the passenger door from my old ep82 advance. it was resprayed along the lower half by a knob head previous owner to make it all black, and although with a clean up looks good, still has the advance sticker under the paint which can be seen if you get right up close to it. there is also a scratch on the glass. door card not to be included, sorry!Price: 30Pictures:Payment & Shipping Details: to be discussed, but collection preferred as heavy and bulky!Item For Sale:Item Condition & Description: A standard fuel rail, will include banjo bolt for feed but the spacers are going with the enginePrice: 10Pictures:Payment & Shipping Details: to be discussedItem For Sale: standard hi lo boost control solenoidItem Condition & Description: a standard hi lo boost control solenoid, with mounting bracket and some of the metal pipework. worked well when removed from my car.Price: 25Pictures:Payment & Shipping Details: to be discussedItem For Sale: standard rad hosesItem Condition & Description: a pair of standard rad hoses from my old gt, with clamps, in good knick. no splits or scuffs, a little grubby but i didnt have anything on hand to clean em before i took the pic.Price: 15Pictures:Payment & Shipping Details: to be discussedItem For Sale: oem headgasket, unused obvItem Condition & Description: an oem toyota head gasket, still in the packet it was sent to me in. Ive no need for it as im going for something pretty hektic bruvv and this isnt going to be substantial enough!Price: 50 onoPictures:Payment & Shipping Details: to be discussed.Item For Sale: ep82 rear bumperItem Condition & Description: a standard ep82 rear bumper in 205 black, resprayed at some point from the original silver. thick paint lol but still cleans up ok. one fixing on the back is split but still functional with carePrice: 30Pictures:Payment & Shipping Details: to be discussed, though collection perferred as fragile ish and bulkyItem For Sale: assorted glassItem Condition & Description: rear glass both sides, front drivers side door glass. in pretty good knick, the tint is pretty messed on the rears and the fixing is missing from one, im selling as just replacement glass really.Price: 25 eachPictures:Payment & Shipping Details: to be discussed, collection preferred really. item for sale: genuine adjustable hks ssqv, item condition and description: a genuine hks super sequential bov, with the silver? now black insert in the front and the adjuster on the back. weld on cup with circlip and new seal included. I was given this years back for repairing someones broken shit, and its been sat around my garage for ages looking sorry for itself. recently i stripped it down to clean the shit out of it and check its diaphram, which turned out to be in great shape and definately the genuine article. pics can be produced on request of this but arnt the best sadly. i hit it with some scotchbrite and now it looks pretty good again, the cup needs to be welded onto an intake pipe mind!pics:price: 65? genuine oldschool jobs like this are hard to find in good knick, seems fair to me?postage to be discussed.item for sale oem 3 point rear brace with all plasticsdiscription, a three point rear brace with all its plastics! hard to find complete like this, its plastics are sadly a bit scuffed but im sure itd look good with a tidy up!pics price 120postage to be discussed!original rad(auto, has mad oil cooler thing built in!) discription: an original rad from my auto starlet, i replaced it with the rad from a manual and so dont need it. its in very good shape, includes the fan! pics: 25 sounds fair postage to be discussed Edited April 26, 2017 by Chops Quote Link to post Share on other sites
Chops Posted July 22, 2016 Author Share Posted July 22, 2016 Ima bump this, as its already two days old lol Quote Link to post Share on other sites
Chops Posted July 28, 2016 Author Share Posted July 28, 2016 Bump! Quote Link to post Share on other sites
Chops Posted August 6, 2016 Author Share Posted August 6, 2016 Bump! pm's for days on all this lot, no one actually buying lol. Quote Link to post Share on other sites
Chops Posted August 20, 2016 Author Share Posted August 20, 2016 Bump! all still here! Quote Link to post Share on other sites
Chops Posted September 4, 2016 Author Share Posted September 4, 2016 Bumpin, loads added, sold shit removed! Quote Link to post Share on other sites
patman Posted September 4, 2016 Share Posted September 4, 2016 Chops mate do you know of that blue rad cap fits half rads please? Quote Link to post Share on other sites
starletezy Posted September 4, 2016 Share Posted September 4, 2016 Pmd buddy Quote Link to post Share on other sites
Chops Posted September 5, 2016 Author Share Posted September 5, 2016 Chops mate do you know of that blue rad cap fits half rads please? yeah, it came off one (mind you, that half rad isn't for sale up here as it had ballooned out madly. not sure if its due to shitty quality rad or the uprated pressure on the cap. to be safe, id stay at 0.9 level mate, its more than enough for a well maintained 4e anyway.) Quote Link to post Share on other sites
patman Posted September 5, 2016 Share Posted September 5, 2016 Pmed mate 👍🏻 Quote Link to post Share on other sites
Chops Posted October 5, 2016 Author Share Posted October 5, 2016 BUMP! this is all still available and im skintskis as usual (bloody projects :L) so offers very much listened to! Quote Link to post Share on other sites
starletezy Posted October 5, 2016 Share Posted October 5, 2016 Manage to find that manifold? lol Quote Link to post Share on other sites
FreedomCore Posted October 6, 2016 Share Posted October 6, 2016 Pm'd Sent from my Nexus 6P using Tapatalk Quote Link to post Share on other sites
Chops Posted October 6, 2016 Author Share Posted October 6, 2016 Manage to find that manifold? lol yeah found it today bud, its yours if you still want it dude! Quote Link to post Share on other sites
starletezy Posted October 7, 2016 Share Posted October 7, 2016 yeah found it today bud, its yours if you still want it dude! Hold it a side please mate will send you funds on pay day Quote Link to post Share on other sites
Chops Posted October 9, 2016 Author Share Posted October 9, 2016 bumpage, loadsa new shit added Quote Link to post Share on other sites
Chops Posted October 20, 2016 Author Share Posted October 20, 2016 Bump, to those interested no i wont deliver the engine, i was all set up to drive the thing to bristol and meet someone halfway who turned out to be a fuckaround, cost me over half my weekend :/ Quote Link to post Share on other sites
Budnbass Posted October 24, 2016 Share Posted October 24, 2016 Hello mate, I'm after the intake manifold, injectors, fuel rail and exhaust manifold. What's the best price for delivered to wd18. Quote Link to post Share on other sites
Chops Posted October 24, 2016 Author Share Posted October 24, 2016 Hello mate, I'm after the intake manifold, injectors, fuel rail and exhaust manifold. What's the best price for delivered to wd18. Ill drop u a pm. Quote Link to post Share on other sites
The Toffinator Posted October 30, 2016 Share Posted October 30, 2016 PMed Quote Link to post Share on other sites
Chops Posted November 3, 2016 Author Share Posted November 3, 2016 Bump! Quote Link to post Share on other sites
Chops Posted December 13, 2016 Author Share Posted December 13, 2016 bump, stuff sold removed, gearbox added! Quote Link to post Share on other sites
Gainzy Posted December 14, 2016 Share Posted December 14, 2016 Stock inlet going for a bargain? Quote Link to post Share on other sites
Chops Posted December 14, 2016 Author Share Posted December 14, 2016 Nah sorry bud, i sold it and the pictures wont bugger off, i delete them and it adds them back on the end of the post again. Quote Link to post Share on other sites
Chops Posted January 27, 2017 Author Share Posted January 27, 2017 Bump, ive got a gfb boost controller and an innovite afr gauge to add at some point this evening too. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.