nikhilkamdar12 Posted July 27, 2016 Posted July 27, 2016 Hi all, After a new original drive shaft nut for the Glanza. Don't know if I'm being blind but looked on the parts site and can't seem to find it?... http://japan-parts.eu/toyota/jp/1999/starlet/ep91-agmqy/4_121150_006_/powertrain-chassis/4302_front-drive-shaft Does anyone know the part number so I can order it from Toyota? Thanks Quote
Starlet__SR Posted July 27, 2016 Posted July 27, 2016 http://japan-parts.eu/toyota/jp/1999/starlet/ep91-agmqy/4_121150_006_/powertrain-chassis/4303_front-axle-hub Quote
nikhilkamdar12 Posted July 27, 2016 Author Posted July 27, 2016 On 7/27/2016 at 9:53 PM, Starlet__SR said: http://japan-parts.eu/toyota/jp/1999/starlet/ep91-agmqy/4_121150_006_/powertrain-chassis/4303_front-axle-hub Legend...yep was being blind! Quote
sseabass Posted August 6, 2016 Posted August 6, 2016 Does anyone have the torque setting for the wheel bearing nuts, I need both front and back. I have EP91 1998Thanks in advance. Quote
roachburger Posted August 6, 2016 Posted August 6, 2016 Fronts are 216nmRears are taper bearings. Just go for a good 1/2" ratchet till tight then back them off and just nip them up a tiny bit more than hand tight ...dont overtighten the rears, if you do the rear wheels will lock solid about a mile up the road.i have photos of the results. Quote
sseabass Posted April 6, 2020 Posted April 6, 2020 I did them to 200nm, close enough. Good to be sure. thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.