Matthewep91v Posted September 17, 2016 Share Posted September 17, 2016 Hi Could anyone help me out with timing of the cam shafts on a 4efte gt engine I have timed the engine up with the 4e marking on the cam pully and I have timed the bottom crank pully up But I am unsure if the cam gears are also out of time.Because the timing has been messed with and the car is no longer starting Really need help Cheers guys Quote Link to post Share on other sites
nikhilkamdar12 Posted September 17, 2016 Share Posted September 17, 2016 If you have timed up the cam pulley with the marking at 4E & the crank pulley at 10 degrees BTDC. With all this just make sure cylinder 1 is at TDC. Then for the actual cams just make sure the the 2 dots on each of the cams are in line together. It should then be fully timed up. Quote Link to post Share on other sites
Sudden Posted September 17, 2016 Share Posted September 17, 2016 Crank should be at tdc not 10 degrees. Quote Link to post Share on other sites
gorganl2000 Posted September 17, 2016 Share Posted September 17, 2016 http://www.toyotagtturbo.com/forums/showthread.php?99425-4efte-engine-timing-and-tork all the diagrams you will need to verify timing Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.