Dan Evans Posted January 22, 2009 Share Posted January 22, 2009 no you wont mate, that comes with the fitting kit.. i bought mine from an RX7 n was the same as yours, i just mounted it n connected the pipes... mine works and sounds mint.... any probs gimmie a shoutthat could be the bracket?? its nothing to do with the performance of the BOV Quote Link to post Share on other sites
Glanza_cl Posted January 22, 2009 Share Posted January 22, 2009 pm'd just figred it lol, sent you a step by step with out that bracket thing. all will work fine. Quote Link to post Share on other sites
iamlegend Posted January 22, 2009 Author Share Posted January 22, 2009 ahhh thats a relief then, ill ave a go at fitting it at the weekend, feel better now knowing i dont need any more bits cheers lads Quote Link to post Share on other sites
Glanza_Ragger Posted January 23, 2009 Share Posted January 23, 2009 I dont believe some people.Imagine all the particles of grit and general everyday shit you would take in with no airfilter.AIRFILTER.. the name kinda gives the game away, it filters the air? Hope you have the bov mounted bud.The HKS valves do sound pretty unique, especially with the high pitched internals.Has to be one of my favourite sounding. Quote Link to post Share on other sites
iamlegend Posted January 24, 2009 Author Share Posted January 24, 2009 right giving this ago like but came threw couple problems outlined in orange)were do i go from here, i am learning lol Quote Link to post Share on other sites
iamlegend Posted January 24, 2009 Author Share Posted January 24, 2009 this is what i have done, no sound of the dumpvalve working thow so must of done sumthing wrong Quote Link to post Share on other sites
iamlegend Posted January 24, 2009 Author Share Posted January 24, 2009 end result thing whats anoying me is the two holes left open near the rocker cover, will i be loosing power from them been open?shall i block them or out Quote Link to post Share on other sites
montanajr Posted January 24, 2009 Share Posted January 24, 2009 end result thing whats anoying me is the two holes left open near the rocker cover, will i be loosing power from them been open?shall i block them or outYou need to block up the hole in the EFI pipe. As for the breather on the rocker cover, you can leave it like that (so its venting to atmosphere) but you'll probs get a mist of oil all over your rocker cover. Either get a catch can or breather filter. Heres my setup:A guy on TGTT was nice enough to send me the SSQV mounting bracket for free, so I've got that on now but its not necessary. In this pic you can see the breather filter fitted and hole in EFI pipe blocked up with some speed tape: Quote Link to post Share on other sites
Newbe Posted January 24, 2009 Share Posted January 24, 2009 The pipe coming out of the rocker cover is just a breather pipe some people put them little breather filters on there, but they tend to spit oil all over your rocker cover, some people hook a oil catch can to it which is proberly your best bet. The other hole... just put something isn't it to block it up. Ill try get a picture up of what i have done as i have the same bov as you Matt Quote Link to post Share on other sites
Newbe Posted January 24, 2009 Share Posted January 24, 2009 montanajr beat me to it but heres a pic anyway.....Matt Quote Link to post Share on other sites
iamlegend Posted January 24, 2009 Author Share Posted January 24, 2009 You need to block up the hole in the EFI pipe. As for the breather on the rocker cover, you can leave it like that (so its venting to atmosphere) but you'll probs get a mist of oil all over your rocker cover. Either get a catch can or breather filter. Heres my setup:A guy on TGTT was nice enough to send me the SSQV mounting bracket for free, so I've got that on now but its not necessary. In this pic you can see the breather filter fitted and hole in EFI pipe blocked up with some speed tape: speed tape, avent got any, couldnt i just use black masking tape or sumthing?i will get a breather filter for the rocker cover but need to find 1 first . any suggestions on were could get 1 from? Quote Link to post Share on other sites
montanajr Posted January 24, 2009 Share Posted January 24, 2009 speed tape, avent got any, couldnt i just use black masking tape or sumthing?i will get a breather filter for the rocker cover but need to find 1 first . any suggestions on were could get 1 from?You could use duck tape or similar I guess. Would look shite and slaggish but would work; just wrap it round the pipe. You can get the breather filters from Halfords if you need one desperately. Probably be cheaper online though! http://cgi.ebay.co.uk/NEW-Breather-Filter-...%3A1|240%3A1318http://www.halfords.com/webapp/wcs/stores/...tegoryId_165660I know which one I'd buy! Quote Link to post Share on other sites
Newbe Posted January 24, 2009 Share Posted January 24, 2009 Got mine off ebay, but places like halfords sell them but they will just charge you about 10 pounds more than there worth!Matt You beat me again montanjr... your too quick for me ha Quote Link to post Share on other sites
montanajr Posted January 24, 2009 Share Posted January 24, 2009 What can I say, I'm a speed demon! Quote Link to post Share on other sites
iamlegend Posted January 24, 2009 Author Share Posted January 24, 2009 You could use duck tape or similar I guess. Would look shite and slaggish but would work; just wrap it round the pipe. You can get the breather filters from Halfords if you need one desperately. Probably be cheaper online though! http://cgi.ebay.co.uk/NEW-Breather-Filter-...%3A1|240%3A1318http://www.halfords.com/webapp/wcs/stores/...tegoryId_165660I know which one I'd buy! nice 1 mate for that, ill just get the ebay 1 alot cheaper lol Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.