Idrees Posted July 15, 2010 Share Posted July 15, 2010 Hey guys,I'm going to purchase a set of Powerflex engine mount inserts but I have an optional LSD gearbox so the rear won't fit. Can anyone advise what to do with the rear mount, I was thinking of maybe using something to fill the gaps in with such as Sikkaflex but I'm guessing I would need something stronger than that.Cheers,Idrees Quote Link to post Share on other sites
bucketep91 Posted July 15, 2010 Share Posted July 15, 2010 do u have the original rear mount? Quote Link to post Share on other sites
Idrees Posted July 15, 2010 Author Share Posted July 15, 2010 I do mate, and it's in good condition but I want to stiffen it up so it's like the Poly mounts. Quote Link to post Share on other sites
5T4R7ET N/A Posted July 15, 2010 Share Posted July 15, 2010 ^^ If you do this your car will vibrate like mad at idle. Ifs gonna be on track then i guess it shudnt bother u 2 much Quote Link to post Share on other sites
bucketep91 Posted July 15, 2010 Share Posted July 15, 2010 turboloon on tgtt asked me for all the mounts off my gt as he had a "contact" who can make poly bushes and was going to make full sets. might be worth asking him if he can sort u out? Quote Link to post Share on other sites
Revo Posted July 15, 2010 Share Posted July 15, 2010 I do mate, and it's in good condition but I want to stiffen it up so it's like the Poly mounts. I read a thread on the Australian starlet club that suggested sikaflexing to stiffen engine mounts.May be worth a search also found this DIY on mounts http://www.austarletclub.com/forums/index....pic=2055&hlHope that helps Quote Link to post Share on other sites
GTnomez Posted July 15, 2010 Share Posted July 15, 2010 Bro, again if you were near i could have had that same guy probably make you one out of metal using old one as a template! Then you would have a proper solid mount! Quote Link to post Share on other sites
Idrees Posted July 15, 2010 Author Share Posted July 15, 2010 Metal is a bit too harsh I'll check that link when I'm at my laptop. Quote Link to post Share on other sites
Asad Posted July 15, 2010 Share Posted July 15, 2010 One of my future DIY mods, did alot of research on thisdont use the stuff that you have to squeeze inside it leaves air gaps so the mount wont last longlook at the hardness rating of the stuff your putting into it (http://en.wikipedia.org/wiki/Shore_durometer)use liquid urethane, clean the mount and pour it in have to leave it to set for a couple of days thosomething like 70-75 hardness would be ideal, if its too much drill some holes in the mount to weaken it a little, also when filling a mount use a good mount not one thats totally fallen apart (even if it does fail it wil get you home)something like this is besthttp://int.rsdelivers.com/product/itw-devc...gm/0692867.aspx Quote Link to post Share on other sites
james@cjperformance Posted July 15, 2010 Share Posted July 15, 2010 are the bushes them selves different or is it just the bracket throw some pictures up of the two if you can Quote Link to post Share on other sites
jason_l Posted July 15, 2010 Share Posted July 15, 2010 I have an LSD box and have the powerflex engine mounts all round Though mines slightly different. Quote Link to post Share on other sites
addz Posted July 15, 2010 Share Posted July 15, 2010 I have an LSD box and have the powerflex engine mounts all round Though mines slightly different. Sorry I have no answer to your question, but a very good mod for the ''real'' feel.I was expecting to leave my rear gear box mount as I also have a LSD, but somehow the polybush was perfect and fitted fine. Albeit my LSD might be aftermarket instead of what I believed to be OEM. Quote Link to post Share on other sites
Idrees Posted July 24, 2010 Author Share Posted July 24, 2010 I had a set of Powerflex mounds sitting in the garage and the rear mount didn't look like it would fit. Addz, could you find out if your LSD is optional? Just get under the car and see if the size of the driveshafts look the same/similar. If the drivers side is a good bit longer then I guess it's aftermarket.Asad the link you've given says POA for price, I've searched but can't really find another supplier. Quote Link to post Share on other sites
Starlet_GT3582R Posted August 2, 2010 Share Posted August 2, 2010 Hey guys,I'm going to purchase a set of Powerflex engine mount inserts but I have an optional LSD gearbox so the rear won't fit. Can anyone advise what to do with the rear mount, I was thinking of maybe using something to fill the gaps in with such as Sikkaflex but I'm guessing I would need something stronger than that.Cheers,IdreesHey champ is this what you are after?If so PM me and i can sort it for you.Cheers Cain. Quote Link to post Share on other sites
Guest Enzo Posted August 2, 2010 Share Posted August 2, 2010 so your still floating about,(here and the sister site)could you do us all a favour and update your build thread just to show if your still have your epic build on the go or not man Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.