Amjad Posted January 29, 2011 Share Posted January 29, 2011 Hey guysDoes anyone know what shape and how many exhaust mounts I need for a full set on my GT? The ones on mine have given up! ThanksAmjad Quote Link to post Share on other sites
Amjad Posted January 29, 2011 Author Share Posted January 29, 2011 ^ Quote Link to post Share on other sites
Starbuck Posted January 29, 2011 Share Posted January 29, 2011 pretty sure its 2 in the middle either side of the hanger and 2 on the back box.TM Developments sell the middle ones not sure if they're ok for the rear Quote Link to post Share on other sites
ryan lang Posted January 29, 2011 Share Posted January 29, 2011 just get a look at the existing 1s, then go buy some matching 1s lol, and a can of wd40 wouldnt go a miss either dude, the hangers go on a piece of piddle with wd40 Quote Link to post Share on other sites
Amjad Posted January 29, 2011 Author Share Posted January 29, 2011 I think it is 4 but I'm not sure what shape they areI'm only asking because I wanted to have them ready for when I'm back! Might not be able to get hold of any then! Quote Link to post Share on other sites
cazzac2222 Posted January 30, 2011 Share Posted January 30, 2011 TM Developments sell some Polybush ones for the middle, ive just orderd two and id like to find a polybush for the rear EP91 back box Quote Link to post Share on other sites
Starbuck Posted January 30, 2011 Share Posted January 30, 2011 Just fitted those 2 today.. solid! Quote Link to post Share on other sites
enots Posted January 30, 2011 Share Posted January 30, 2011 halfords sell polybush ones dude there is a couple of universal shape ones there. The ones i used for my back ones are like a oval shape which was the same as the rubber ones fitted before. I assume the middle ones are the same shape.. Quote Link to post Share on other sites
Starbuck Posted January 30, 2011 Share Posted January 30, 2011 middle ones i bought:http://www.tm-developments.com/index.php?m...5gjc7odqecvn8n0 Quote Link to post Share on other sites
Amjad Posted January 30, 2011 Author Share Posted January 30, 2011 Starbuck did you change the rear ones too?Owain these are the ones on TMD dunno if they're the same for the back box because there's two different sizes?TMD Polyflex Exaust bushes Quote Link to post Share on other sites
Starbuck Posted January 30, 2011 Share Posted January 30, 2011 Only got the 2 rubbers. Need to measure the rear one. I didn't realise there was 2 sizes when i ordered.Fitted mids today: Quote Link to post Share on other sites
Amjad Posted January 30, 2011 Author Share Posted January 30, 2011 Cool do let me know if you find the rear ones Those middle ones are defo two different sizes but fit okay yeah? Quote Link to post Share on other sites
Starbuck Posted January 30, 2011 Share Posted January 30, 2011 Cool do let me know if you find the rear ones Those middle ones are defo two different sizes but fit okay yeah?They were tight (which is good) and needed some gentle persuasion. But otherwise fine Quote Link to post Share on other sites
ryan lang Posted January 30, 2011 Share Posted January 30, 2011 anyone intending to change exhaust rubbers, use wd40 and they will slip straight on with a push Quote Link to post Share on other sites
Amjad Posted January 30, 2011 Author Share Posted January 30, 2011 Anyone else know what ones I'll need for the back? Quote Link to post Share on other sites
ryan lang Posted January 30, 2011 Share Posted January 30, 2011 i would say, but mines an n/a and the hangers are in different places Quote Link to post Share on other sites
Amjad Posted January 30, 2011 Author Share Posted January 30, 2011 Lol no worries, wish I could check; I've searched here and TGTT and can't find anything! Quote Link to post Share on other sites
ryan lang Posted January 30, 2011 Share Posted January 30, 2011 sounds like owain said they oval 1s are used at the back too dude, just get some poly oval 1s like the 1s in halfords bud Quote Link to post Share on other sites
Amjad Posted January 30, 2011 Author Share Posted January 30, 2011 I've messaged him to double check! Quote Link to post Share on other sites
ollie ryan Posted January 30, 2011 Share Posted January 30, 2011 so where do those ones on tm developments go?my exhaust rattles on my rear axle so need to raise it up abit ordered the ones on tm so what else do i need? Quote Link to post Share on other sites
Hazzagray Posted January 30, 2011 Share Posted January 30, 2011 The rear one i Had for my HKS exhaust was a long one with the joiners either end....Nothing even similar to the mid ones :S Quote Link to post Share on other sites
Amjad Posted January 30, 2011 Author Share Posted January 30, 2011 Yeah I was wondering where they'd gone! Works out cheap if you get the TMD ones but they're out of stock now! I was looking at this Powerflex Exhaust Mount Catalogue looks like it's no5 which is the TMD ones?Still haven't got a clue about the back though! Quote Link to post Share on other sites
ollie ryan Posted January 30, 2011 Share Posted January 30, 2011 sorru dude i ordered the last ones in stock lol Quote Link to post Share on other sites
Amjad Posted January 31, 2011 Author Share Posted January 31, 2011 No worries lol I'll need 'em by next week! Quote Link to post Share on other sites
Starbuck Posted January 31, 2011 Share Posted January 31, 2011 Cool do let me know if you find the rear ones Those middle ones are defo two different sizes but fit okay yeah?I measured the rear one (not the bumper mounted one) and mine was 7cm Height (stretched a little). So i'm sure a 6cm would be fine. Keep it a little higher off the rear axle. Oval type as before. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.