TrisK Posted April 1, 2011 Share Posted April 1, 2011 What is this nipple, looks like a vacuum hose, is it just meant to go to air?Just to oriantate, you, that is my actuatorand the blue hose comes off the turbo inlet for my relocated air filter.Thanks Quote Link to post Share on other sites
micky boy Posted April 1, 2011 Share Posted April 1, 2011 Thats the vacuum hose for the Hi/Low boost but cause you have got the HKS actuator its no longer needed orr if you would like to reconect the HI/low boost then just T-pice it Quote Link to post Share on other sites
Socks Posted April 1, 2011 Share Posted April 1, 2011 its an very annoying pipe... that can only be removed if u remove the PAS pump...it becomes redundent when you fit a HKS actuator Quote Link to post Share on other sites
BoGlE Posted April 1, 2011 Share Posted April 1, 2011 Theres one bolt holding it on. Think its the timing belt cover bolt. Undo that then just wiggle it and give it abit of manly persuasion Quote Link to post Share on other sites
Fro Posted April 1, 2011 Share Posted April 1, 2011 There should be another bolt that socks mentioned Quote Link to post Share on other sites
rabbit1234 Posted August 24, 2011 Share Posted August 24, 2011 hi guys I've just fitted a hks acuator like the guy above and i got a spare vacum hose that origanl went to the old acuator and back to a small square box (on the drivers side quite close to the strut) and a second pipe running off some where. is that the little box im suppost to take off went i uprate the actuator. i have an ep82 if that helps. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.