GT Phayer Posted April 9, 2011 Share Posted April 9, 2011 im wanting to paint/spray the inside of my starlets floor whats the best way to do this also would hammerite be ok ? Quote Link to post Share on other sites
ollie ryan Posted April 9, 2011 Share Posted April 9, 2011 if you want it to look gop0d get a compressor and a spray gun and do it properly anything else in my opinion would look awful Quote Link to post Share on other sites
GT Phayer Posted April 9, 2011 Author Share Posted April 9, 2011 cheers mate Quote Link to post Share on other sites
RobSR Posted April 9, 2011 Share Posted April 9, 2011 you can do it fine with aerosol cans aswell, its not hard atal..just take your time and prep it properly. Quote Link to post Share on other sites
GT Phayer Posted April 10, 2011 Author Share Posted April 10, 2011 just worried about over spray going everywere Quote Link to post Share on other sites
ollie ryan Posted April 10, 2011 Share Posted April 10, 2011 as for over spray mate, just go to a local suppier and buy some large rolls of brown masking paper and just remover as much trim as possible and what you want remove mask up, just spend a good amount of time masking up, if you screw up masking up its not the end of the world but overspray on windows is a pain in the arse and takes a while to clean off but you just use some fine wire wool to remove it Quote Link to post Share on other sites
GT Phayer Posted April 10, 2011 Author Share Posted April 10, 2011 cheers mate Quote Link to post Share on other sites
lew777 Posted April 10, 2011 Share Posted April 10, 2011 When i had mine done mate they took the back windows out and the seals Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.