t-j-wilson Glanza V Posted April 10, 2011 Share Posted April 10, 2011 Hey everyone.I had a fiddle with the car today, i've ordered some parts to relocate my air filter. But i came across this peice of hosing which is mounted onto the stock pipe. Obviously im going to remove this stock pipe when i relocate the air filter, but what do i do with this? I know it's to do with the 1st 2nd gear restrictions, but don't know wether it's ok to unplug or what. Help would be great! *Bit surrounded by blue*Thanks, Tobie Quote Link to post Share on other sites
t-j-wilson Glanza V Posted April 11, 2011 Author Share Posted April 11, 2011 BUMP! Someone must know Quote Link to post Share on other sites
LukeH Posted April 11, 2011 Share Posted April 11, 2011 Dunno if this will help as i can see this picture you posted becasue im at work but: http://www.ukstarletclub.com/forums/index.php?showtopic=1179hope this helps Quote Link to post Share on other sites
james@cjperformance Posted April 11, 2011 Share Posted April 11, 2011 just vent it to atmosphere i believe Quote Link to post Share on other sites
t-j-wilson Glanza V Posted April 11, 2011 Author Share Posted April 11, 2011 Thats exactly what mine looks like mate, but that photo also has the stock pipe for the air filter. When you relocate you remove the stock piping, but i don't know where/what to do with the hosing, it connects to a metal pipe which looks to go into the side of the engine/turbo :S. My mate has relocation but doesnt have the metal pipe going into the side? hmmm. I'll go and grap a pic of the side in a sec. James@CJ: Should i not be worried about water/crap getting into the tube if i just vent it into the atmosphere?Thanks for the replys guys. Quote Link to post Share on other sites
t-j-wilson Glanza V Posted April 11, 2011 Author Share Posted April 11, 2011 Pictures of the metal pipe. Quote Link to post Share on other sites
neilsmith Posted April 11, 2011 Share Posted April 11, 2011 I am also going to relocate my air filter and need to know where this hose goes to,Cheers Quote Link to post Share on other sites
ep91steve Posted April 11, 2011 Share Posted April 11, 2011 Vent it Quote Link to post Share on other sites
Hazzagray Posted April 11, 2011 Share Posted April 11, 2011 Here you go mate, a How to from tgtthttp://www.toyotagtturbo.com/forums/showth...Solenoid-Bypass Quote Link to post Share on other sites
bucketep91 Posted April 11, 2011 Share Posted April 11, 2011 you dont need to connect that back up, just dissconnect it, you can even take the metal pipe off if you want, it goes down the side underneath and ends at the actuator Quote Link to post Share on other sites
_shaun_ Posted April 11, 2011 Share Posted April 11, 2011 hmm mines got a lil bolt in the end of it will be riping that off tomorow Quote Link to post Share on other sites
TrisK Posted April 11, 2011 Share Posted April 11, 2011 mine is just capped. thats how it came from japan Quote Link to post Share on other sites
grimr3ap3r_ Posted April 23, 2011 Share Posted April 23, 2011 I ran into this problem today so I can just cap or remove the metal pipe? If I remove the metal pipe do I need to cap where it goes to to prevent stuff getting in?Thanks liam Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.