mini valver Posted May 4, 2011 Share Posted May 4, 2011 i have followed all of the instructions on how to set the manual tps on the gt. but is there a certain amount of revs the car is ment to be set at before you go thro the process o setting the tps. i do every thing it says and have all the correct readings on a multimeter but the same thing happens it revs up and down. please help Quote Link to post Share on other sites
mrkd5916 Posted May 4, 2011 Share Posted May 4, 2011 i have followed all of the instructions on how to set the manual tps on the gt. but is there a certain amount of revs the car is ment to be set at before you go thro the process o setting the tps. i do every thing it says and have all the correct readings on a multimeter but the same thing happens it revs up and down. please helpit should like you got a air leak some where, i could be wrong tho, Quote Link to post Share on other sites
mini valver Posted May 4, 2011 Author Share Posted May 4, 2011 cheers for the quick reply mate but it aint that because when you disconnect the tps it ticks over fine only when the tps is plugged in does it rev up and down Quote Link to post Share on other sites
rorenapier Posted May 4, 2011 Share Posted May 4, 2011 Possibly the TPS is goosed?I had a right pain in the arse with mine when i had it, the bracket was wank for the TPS! Quote Link to post Share on other sites
mini valver Posted May 4, 2011 Author Share Posted May 4, 2011 i had a bracket made for it mate as you say the brackets were wank mine kept falling off lol so got one made out o a billet of alloy it aint falling off now just can not get it set up. it can not be that as today i have used another tps off a glanza that has never been fiddled with.come on lads use are the experts really need this sorted Quote Link to post Share on other sites
Marck glanza V Posted May 4, 2011 Share Posted May 4, 2011 Mine was doing the same thing Try starting it without the tps plugged in and see if it fixes the idle If it does just try resetting the tps again. It worked for meEdit: I had to file down the tps holes so that I could get the right adjustment Marck Quote Link to post Share on other sites
mini valver Posted May 4, 2011 Author Share Posted May 4, 2011 cheesr for that to mate has all been done and not joking about 20 times had it started with tps unplugged and plugged in still same old shit Quote Link to post Share on other sites
rorenapier Posted May 5, 2011 Share Posted May 5, 2011 Still sounds like the TPS is goosed? I never had any hunting issues, but i had alot of bother with getting mine setup, same as Marck, had to fle the TPS slots for the correct adjustment needed.Will it idle at all? Hot or cold? Quote Link to post Share on other sites
nastyrash 2003 Posted May 5, 2011 Share Posted May 5, 2011 set the TPS up then reset ECU. Quote Link to post Share on other sites
mini valver Posted May 5, 2011 Author Share Posted May 5, 2011 i think the problem has been solved. the tps was fine. but one of the vacumes had a minute hole in. and as soon as this was sorted engine pured like a kitten a again still ticking over hi but will reset the tps again tomorrow and hopefully should be good for some track time on sat Quote Link to post Share on other sites
Bean Posted May 6, 2011 Share Posted May 6, 2011 borp borp!!! if i hadnt been at work yesterday it would be have all sorted by dinner time no probs! haha Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.