nastyrash 2003

i will put it on starlet club colin mate. chris.

also whille this subject has comup. the forged rods with the grooves provide much better oil breakout from the crankpins (replenishing) and lubricate the thrust surfaces much better reducing frictional losses and reduce shell to pin radius ride. xx

colin get face book and com on our page unit 6 motor sport. all our engine get stripped and all info put up thr for all to see mainly the toyota engines and honda. we have built a d15y8 engine at the min that should be amazing. its got the 3rd compression ring (good for boost) and a very good crank to rod ratio. a t3/t4 turbo is going on. should make the b18 look tame. xx

the big end and even thrust clearence of the conrods and main caps (crank) is lubed by oil breakout from the shells the only part of the crank that might be subject to splash/misting will be the little end but thr is a oiler hole on all e serise con rods. so this is now not the case. misting is not desirable in pro engines. just in its nature it increases crank case pressure (not good).

love you to mate. and hows u and family. i will explaine the oil system and how it works and flow paths on starlet club mate. dead simple.

and to answer the question asked here it simple. or at least could be = heat and piston ring sealing. expansion of the piston due to inaficent heat removal of the bore walls and rings = (runin process). or seizer of the little end forcing the crank to have to force the rod round = conntact with the crankpin and shell.

luk is right guys. i can put up direct pics of the main oil gallery from the oil pump to the oil pressure switch. cant belive wat im reading. splash to feed your big ends "crazy talk" even the little end whitch in som cases can be fed by splash on the 4efte is fed by a hole in the con rod called a oiler. this require pump presure behind it to do its job. com pn guys this is basic stuff.

u the man, now we talking proper power and u can tune this motor like u would not belive. proper petrol head. chris and holy crap thats tighter thn the corsa.

oh yes, wen i fitted my side exit on a standard outfit the difference was massive. so this should do a very good job. lov it. chris

u got it in 1, wat was ment is thr is loads more thn just unbolting and rebolting. i do mine in the kitchen, the dish washer cleans things a treat. hehehehe chris. xx

^^ i would never do this. its so easy to fit a wide band. chris.

just watch out for bangin it thy very delacat. thats the problem with fitting thm under the car if it takes a nock i always fit on down pipe if poss, warms up faster and does not tend to soot up . chris

looks good my mate, getting a bit of wheel spin thw the gears thw. keep at it the only way to get better is to do it. chris

gutted sparky, engine building is a fine art as im sure u know. welcome to the wonderful world of motor sport people. chris. p.s makes me laff wen i see people on u tube building thm in thr sheds.!!!

1) Socks 2) Raffa 3) josheyboy006 4) daz gt turbz 5) ollie ryan 6) N80Jamie 7) whitegv Starbuck 9) iamlegend 10) torturedglitch 11) LukEP 12)Jamie1st 13)BLITZ 14)Driver 15) String 16) Lew777 17)Ro55ifumi + Hair 18) mattyd 19) Starlet__SR 20) Steve GT 21) LukeSR 22) Stavros 23).nastyrash2003

ollie u legend u. 1 of my fav Vs on the site and u just made it better. did u lads sort the power issue. if i was close i would com and have a look fella. keep it up it looks awsome pal. big time. chris

not bin on for a bit blowing off som much built up steam. but to com back on and see this?. gutted is the only word. takes the wind out of u, on the spot. thinking of his family and friends. just terable news. R.I.P dave much lov fella. chris

very nice mate, took a cupra petrol round angelsey track wen thy wer a few years old and my god thy fun to thw round was not going very fast but sliding all over the show. looked mint and pure tyre squeel. chris

count me in fella, am down for this. chris

lov um both, me and woody went on a little adventure around the place and fook me he is even worse off the leash. the s2000 lot was loving his dancing and i could not breath for laffin. awsome weekend guys. xx chris

count me in guys. i have more bits then u can poke a stick at. and tools and soon lots of time. chris

must admit thr was a little irish infuance missing this year.

this box is smooth as, the nicest 6 speed i have felt yet, have fun fella. a truly unique car mate keep it up. chris

big thanks to all the admin staff for such a awsome weekend and plot, and stand. and show, the plot was epic the cars could be looked at from every and any angle u wished. and wat a mint group of peolpe. was feeling the lov all weekend that was going round. xxx x xxxx xxxxxx xxxxx. made som mates for life me think. chris. and thanks to the admin for not skining paul, he is a bad boy but i think is learning by past mistakes.

wats the problem with power u having ollie, any noises, smoke, missfireing ex. lets get tot the bottom of this mate,