N80Jamie Posted June 15, 2011 Share Posted June 15, 2011 I should hopefully be going to get my Racetech TD04 kit tomorrow and just wanted to know what spring is in the external wastegate that RaceTech supply? I'm currently only running a FCD and RRFPR and don't want to run any higher boost than 0.6-0.7bar ideally until i sort an ECU. Cheers Quote Link to post Share on other sites
LukeSR Posted June 15, 2011 Share Posted June 15, 2011 Are you buying from Race-Tech?If so just pop them an email / phone call Quote Link to post Share on other sites
N80Jamie Posted June 15, 2011 Author Share Posted June 15, 2011 Not buying direct from them. Buying the one in the classifieds dude. I'll try and get in contact with them though if i can't get an answer here Quote Link to post Share on other sites
Ryan Posted June 16, 2011 Share Posted June 16, 2011 When i bought mine of racetech i was told i would have a spring rated to 0.9 inside the wastegate. But when all was fitted an took for a test drive it over boosted to near 1.4 ended up there was two springs inside 0.9 one and a 0.5. Think most racetech kits come with a 0.9 spring Quote Link to post Share on other sites
N80Jamie Posted June 18, 2011 Author Share Posted June 18, 2011 Fitted it all yesterday and today, took it for a test drive and it was boosting to 1bar. I had a look inside the wastegate though and there was 1 big spring and 1 small spring. Can I just take the big one out? 1bar is way to high for me as I'm in mapped atm. Quote Link to post Share on other sites
_shaun_ Posted June 18, 2011 Share Posted June 18, 2011 u can take 1 spring out there all colour coded to there pressure rating have a look on the tail website to see what 1s u have Quote Link to post Share on other sites
N80Jamie Posted June 18, 2011 Author Share Posted June 18, 2011 So i can defo take the big spring out and leave the smaller one in with no issues? I did have a quick look on the tial website but couldn't find my wastegate at first look! Quote Link to post Share on other sites
rorenapier Posted June 18, 2011 Share Posted June 18, 2011 Get the colour codes from them first then decide which one to take out.All tial springs will fit any of there gates. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.