paul mc Posted June 21, 2011 Share Posted June 21, 2011 Not sure what size of mini oil breather filter to buy can anybody shed any light on this and where to get them ? Quote Link to post Share on other sites
LeeG Posted June 21, 2011 Share Posted June 21, 2011 dont buy one as they make mess of engine bay by letting oil out. but a oil catch can tht will work better than breather Quote Link to post Share on other sites
Addymk2 Posted June 21, 2011 Share Posted June 21, 2011 dont buy one as they make mess of engine bay by letting oil out. but a oil catch can tht will work better than breatherI got one off ebay for about £6 delivered, hasn't let a drop out yet and has been on for a few months and a few thousand miles! Quote Link to post Share on other sites
paul mc Posted June 21, 2011 Author Share Posted June 21, 2011 Cheers mate just bought a air filter relocation kit and was unsure what to do with the pipes Quote Link to post Share on other sites
paul mc Posted June 21, 2011 Author Share Posted June 21, 2011 what size was it you bought tho ? Quote Link to post Share on other sites
addz Posted June 21, 2011 Share Posted June 21, 2011 I know I'm not of much help with which to buy, or what size, but mines been on there long enough, and I've yet to see a drop of oil.I used one off my R/C car Quote Link to post Share on other sites
paul mc Posted June 21, 2011 Author Share Posted June 21, 2011 bump anybody know? Quote Link to post Share on other sites
addz Posted June 21, 2011 Share Posted June 21, 2011 One of these two should be up for the job - if inlet pipe is slightly smaller, you can always place it in boiling water like I did to expand rubber. If slightler larger, screw the clip - pretty simplehttp://cgi.ebay.co.uk/Universal-Air-Breath...=item4830e62cfa - 12mm neckhttp://cgi.ebay.co.uk/NEW-Breather-Filter-...=item3f0af17fe8 - 10mm Quote Link to post Share on other sites
paul mc Posted June 21, 2011 Author Share Posted June 21, 2011 thanks mate Quote Link to post Share on other sites
Addymk2 Posted June 21, 2011 Share Posted June 21, 2011 Even if its over sized I just pulled mine ridiculously tight with a cable tie, its the same as the piper cross ones they sell in halfords, only cheaper, and they are one size only I think mate Quote Link to post Share on other sites
addz Posted June 21, 2011 Share Posted June 21, 2011 Also a jubilee does a good job Quote Link to post Share on other sites
jdm-andy Posted July 1, 2011 Share Posted July 1, 2011 14 or 15mm measured with verniers, buts 12 will fit i guess, mines 15mm i think :S cant remember Quote Link to post Share on other sites
Chris Green Posted August 4, 2011 Share Posted August 4, 2011 I got a 10mm one that went on to the rocker cover. Auto Silicone Hose's mine was around £3-4, looks good aswel Quote Link to post Share on other sites
ryan lang Posted August 4, 2011 Share Posted August 4, 2011 the n/a 1 is about 9mm, and the fte is 11mm i think, but the 9mm will stretch over the fte 1 anyway go on autosiliconehoses.com Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.