Gainzy Posted June 18, 2012 Share Posted June 18, 2012 I have an ebc the gizzmo one, just fitted a jam actuator and overboost is an issue... I could put my foot to the floor with the stock actuator but now it goes up to1.1 sometimes little over. Its pretty annoying as I have to change gear early at like 4 thousands revs unless I push gently then as the revs go up i can then put the boost on, surely there is a safe setting on the ebc if anyone has one.. cheers Quote Link to post Share on other sites
akyakapotter Posted June 18, 2012 Share Posted June 18, 2012 Mine creaps to that it's fine mate Quote Link to post Share on other sites
Gainzy Posted June 19, 2012 Author Share Posted June 19, 2012 i hate not been able to put my foot down in second gear lol al have to look at the ebc manual surely there is a safety setting, I dont wana blow up... Quote Link to post Share on other sites
akyakapotter Posted June 19, 2012 Share Posted June 19, 2012 Your not gonna blow up mate I been rocking 1bar with creep for over a year now aslong as you have fueling adjusted right it will be ok yeah they're should be a warning setting I have mine set to 1.3 so if I hit that I drops the boost off Quote Link to post Share on other sites
pick1 Posted June 19, 2012 Share Posted June 19, 2012 I bar is fine aslong as your fueling is set to it and could be your actuator allowing boost creep go with the above see if u can set your ebc to either a bar or 1.2 to try and stop it but failing that a larger waste gate n penny may solve it Quote Link to post Share on other sites
Amjad Posted June 19, 2012 Share Posted June 19, 2012 Port the wastegate, job done Quote Link to post Share on other sites
killamats Posted June 25, 2012 Share Posted June 25, 2012 Either port the wastegate, or perhaps easier and a long term fix will be going for an external wastegate setup. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.