hazell ep91 sr Posted July 17, 2012 Share Posted July 17, 2012 in the middle of a 4efte conversion, and weve hit a big problem, i have dash loom and engine loom from a glanza, but noticed when i ran engine loom in where indictor plug comes in by drivers door the glanza interior loom has no plug to match. not sure if there is something missing or not? if anyone could post some pictures of what the loom should look like or has any ideas then please help. also not sure if i have to use a roof loom and boot loom from the glanza too as i am struggling to find the conection for the n/a boot loom to the glanza interior loom,helppppp. this has but a halt to the conversion! Quote Link to post Share on other sites
jimmymac101 Posted July 17, 2012 Share Posted July 17, 2012 have you got glanza indictor stalks ? Quote Link to post Share on other sites
hazell ep91 sr Posted July 17, 2012 Author Share Posted July 17, 2012 yes Quote Link to post Share on other sites
ro55ifumi Posted July 17, 2012 Share Posted July 17, 2012 Mate have a read @ Rob's build, he has just done the electrics on his conversion ;)http://www.ukstarletclub.com/forums/index.php?showtopic=2829&st=855John Quote Link to post Share on other sites
hazell ep91 sr Posted July 17, 2012 Author Share Posted July 17, 2012 thanks bud Quote Link to post Share on other sites
rob_bower Posted July 17, 2012 Share Posted July 17, 2012 From what I understand you should/will have some spare plugs. I've not got my engine in yet but when I do I will be connecting the battery up to see what works and what doesn't. As for looms Ive used the glanza boot loom. Ive got pics of the plugs I have spare I'll upload them at some point see if anyone can identify them. Rob Quote Link to post Share on other sites
bucketep91 Posted July 17, 2012 Share Posted July 17, 2012 Mines fully wired up and turning over now rob, bar the drivers window and interior light and i still have the same spare plugs as you rob if that helps any?The plug hes lost with is for the abs unit under the dash board Quote Link to post Share on other sites
rob_bower Posted July 17, 2012 Share Posted July 17, 2012 Lol I think that helps mate at least we're all in the same boat and yea if it's turning over with those spare plugs we must be on the right track. Quote Link to post Share on other sites
hazell ep91 sr Posted July 18, 2012 Author Share Posted July 18, 2012 next problem, old interior loom has airbag unit and wiring on and glanza interior loom doesnt? think i need to buy another interior loom with it on and with manual heater controls and the one i have at the moment has digital and i really cant be bothered to change heater matrix, no airbags is a problem :/ help again! lol but got all engine loom ran in and ready to go, so some progress lol! Quote Link to post Share on other sites
morgey Posted July 18, 2012 Share Posted July 18, 2012 I would have thought by now the ins and outs of a 4efte conversion would have been covered so many times it would have been stickied by now lolI swear i had less problems wiring in a 4age than you guys with your 4eftes Neway hope you get it sorted swiftly ;) Quote Link to post Share on other sites
hazell ep91 sr Posted July 18, 2012 Author Share Posted July 18, 2012 lol thanks mate. Quote Link to post Share on other sites
hazell ep91 sr Posted July 18, 2012 Author Share Posted July 18, 2012 only problem i have is my n/a loom has airbag stuff on and a manual heater controls and glanza loom i have hasnt got any airbag stuff on and digital push heater controls :/ also not sure where the boot loom connects up to the interior loom Quote Link to post Share on other sites
morgey Posted July 18, 2012 Share Posted July 18, 2012 Ahh urs must be a 98 spec loom then, strange it doesnt have the airbag stuff on it though :/ Quote Link to post Share on other sites
hazell ep91 sr Posted July 18, 2012 Author Share Posted July 18, 2012 my n/a is a 98 but i take it the glanza loom i got is a 98? probs why im having problems maybe? Quote Link to post Share on other sites
hazell ep91 sr Posted August 2, 2012 Author Share Posted August 2, 2012 Problems solved changed heater matrix and spliced rear and roof loom in Quote Link to post Share on other sites
bucketep91 Posted August 2, 2012 Share Posted August 2, 2012 How have you spliced the rear loom in mate? Got any pics? Quote Link to post Share on other sites
hazell ep91 sr Posted August 3, 2012 Author Share Posted August 3, 2012 Yeah i did mate. Pulled the plug that runs down drivers side and moved it into middle of car with the plug that comes up the middle from fuel pump etc. Cut plug ends off and soldered wires onto a glanza boot loom plug which i had. Matched the coloured wires. Did the same with the roof loom. However fuel pump isnt working. Will try find some pics. Quote Link to post Share on other sites
teta Posted May 8, 2013 Share Posted May 8, 2013 hi can anyone help me with my 4efte conversion into my toyota corsa Quote Link to post Share on other sites
teta Posted May 8, 2013 Share Posted May 8, 2013 email me tetajulienne@hotmail.com fuse box wiring help needed,& center wiring engine to cabin loom Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.