Jump to content

Loom issue during SR/Glanza conversion, please help


Recommended Posts

So after refittin the dash with DAVEEP weve plugged EVERYTHING in apart from the 1 female plug for the rear loom and the remaining plugs DO NOT plug into the wiper/indicator stalks and if you look in the pic, the white plug held at the very top, we havnt got a clue what its for.

any ideas what its for? any idea what the plugs that are supposed to fit but dont are for?654FB08B-orig.jpg

Link to post
Share on other sites

Not sure what im looking at here mate, where are these plugs? In the drivers footwell? Not everything has to be plugged in, u will have a couple spare and theres more than 1 plug for the rear loom, they run under the sill cover on the drivers side

What looms have u changed and is there any of the original loom in there?

Link to post
Share on other sites

its all the glanza loom now bud, sr loom went in the bin yonks ago, the plugs held by the left hand are on the wiper/indicator unit and the ones on the right hand are the only plugs that we thought would fit the unit and they dont so fuck knows what im gonna do now lol

also the rear loom has a 1 plug i think and it doesnt fit in any of the plugs :sad:

oh and the plugs in the right hand r the ones that hang around the steerin column. the white plug in the right hand at the very top is a spare 1 that comes of the ignition but yet the ignition is all wired up, so annoyed at this lol

Edited by PaulStarletSR
Link to post
Share on other sites

theyr defo glanza stalks bud, indicators n wiper stalks r opposite from the uk spec.

all the loom and stalks came from kennedys glanza, charlie il have a look for a spare grey plug at the centre console 2moz when i get up, then if i find it thatl only leave 1 problem with the stalks left to solve

Link to post
Share on other sites

Right Paul here goes.

This is the boot loom plug near the stereo.

66564C6B-7346-4102-8E6F-9FB62787E5ED-335-00000021A0FB569A.jpg

This is the ignition switch plug.

C9C0534E-9EA0-4100-9601-BB436ADC589C-335-00000021ACE1FE9C.jpg

These are the 3 for the stalks

1D6C348F-A373-4DC0-B14E-B20BD8E1E018-335-00000021B379186C.jpg

These 6 I have spare. One will be front fogs one hi/low boost. One must be for the roof loom and one for the electric mirrors.

4BAEA5F0-34B8-4A61-9529-3C7E5FAAD528-335-00000021D318E7BC-1.jpg

4725B29F-794C-491D-878D-650F1D148B4A-335-00000021D80E049D.jpg

I still don't think there glanza stalks unless there late spec ones and there different. This is the bottom of mine.

2701ED61-06F0-48A4-8DD2-695C91B02860-335-00000021CE494C2C.jpg

Hth

Rob

Link to post
Share on other sites

nice 1 rob,it appears the rear loom is connected then but this 1 white plug comes from the same rear loom but goes down the drivers side and has nuthin to plug into,what cud it b for?AC0187A8-orig.jpgthis next picture is said rear loom plug that is sorted now7F2C860D-orig.jpgbut this next pic shows a white plug on its own bhind the dash on the drivers side, aint got a clue what its for!4C58A05D-orig.jpgalso i just dont get y the plugs dont fit into the stalks as Idrees said everythin came from Kennedys silver glanza :sad:

Link to post
Share on other sites

its for the seatbelt pre-tesioners i believe the the relevant wires were plugged into the seatbelts when i removed the glanza loom. its not plugged in on mine either.

either way its not needed so dont worry lol

Edited by rob_bower
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...