daniel_g Posted May 31, 2013 Share Posted May 31, 2013 Its an easy job to do mate, ive just done this the other week. Cables from a N/a can be used on a Glanza/GT by the way.Four bolts hold the shifter housing on in the car. Theres two 10mms on the bulkhead where the cables go through on the inside and another two in the bay at the same place. Then just undo the cables from the box, pull the clips up the way.And pull and feed the cables from inside the car.I didnt have a carpet in mine so it may be a little more difficult with it in. Quote Link to post Share on other sites
daniel_g Posted May 31, 2013 Share Posted May 31, 2013 Also make sure not to drop the holding clip from inside the shifter housing which holds the selector cable on.And obviously re grease everything Quote Link to post Share on other sites
Whatsthestorey Posted June 6, 2013 Share Posted June 6, 2013 Did the cables sort the problem. I hav slack on the other one and can't select first but can select all others. Sometimes when goin to 5th I get third Quote Link to post Share on other sites
Arnold Posted June 7, 2013 Author Share Posted June 7, 2013 My mechanic told me he's replaced the cables yesterday but I don't know if he test drove it or not, so stay tuned and i'll find out later! Quote Link to post Share on other sites
Whatsthestorey Posted June 8, 2013 Share Posted June 8, 2013 Did your shifter selection feel sloppy also Quote Link to post Share on other sites
Whatsthestorey Posted June 8, 2013 Share Posted June 8, 2013 Do u no if part no 33261d from the drawing is a bushing I was told it could be that, because mine doesn't seem to hav one which is givin some play. Quote Link to post Share on other sites
Broony Posted June 8, 2013 Share Posted June 8, 2013 did you pay £150+ or used secondhand? thats expensive for cables lol!! Quote Link to post Share on other sites
daniel_g Posted June 8, 2013 Share Posted June 8, 2013 I hope you didn't pay anything like that ^^ I got replacement cables from a N/a for 20 quid inc delivery. Quote Link to post Share on other sites
Arnold Posted June 10, 2013 Author Share Posted June 10, 2013 Do u no if part no 33261d from the drawing is a bushing I was told it could be that, because mine doesn't seem to hav one which is givin some play. Sorry mate I couldn't tell you. Did your shifter selection feel sloppy also No it felt the same, just 'soft' when engaging as there was no resistance. I hope you didn't pay anything like that ^^ I got replacement cables from a N/a for 20 quid inc delivery. No mate, £35 for a replacement shifter with the cables. I've got a short shifter on mine so mechanic swapped the cables over. Happily report that she now runs as normal, and still mis firing but that's another issue. Quote Link to post Share on other sites
Whatsthestorey Posted June 10, 2013 Share Posted June 10, 2013 Ye I looked it up and it is a bushing think that's why I'm missin first soon find out tryin to get it in the next couple a days. Quote Link to post Share on other sites
Whatsthestorey Posted June 26, 2013 Share Posted June 26, 2013 Got the bushing gearbox sorted. £9 didn even have to take the linkage off Quote Link to post Share on other sites
starbogt Posted August 8, 2013 Share Posted August 8, 2013 Where did you get the cables from for £35? were they second hand? Quote Link to post Share on other sites
Arnold Posted August 8, 2013 Author Share Posted August 8, 2013 Where did you get the cables from for £35? were they second hand? Ebay and yeah they were Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.