stup86 Posted October 25, 2007 Share Posted October 25, 2007 Fairly simple really.2 screws holding the dial surround in.3 screws holding the dials in.Then just squeeze hand behind dials and remove the 3 plugs of wires to the dials and the cable for the speedo. Then you have to twist and play around until you can get the dials out.Not too much trouble. Quote Link to post Share on other sites
SiCaln Posted October 25, 2007 Share Posted October 25, 2007 not that hard Shell but it does involve almost certainly cutting urself, 2 screws to take the cover off, then 3 screws hold the cluster in position, undo these drop it down then feel down the back for the lead that plugs in to it unclip that then it comes off in your hand - it can be easier to take the plastic screen and other bits off to get it out Quote Link to post Share on other sites
Sparky Posted October 25, 2007 Share Posted October 25, 2007 Hmmm sleeves it is Quote Link to post Share on other sites
Nanglebadger Posted October 25, 2007 Share Posted October 25, 2007 take it from someone who has MELTED 3 ep91 cluster circuit boards....get the damn sleeves!!!!!! i have the LEDs in now and they're grand as they arnt too bright at nite which is good.get the sleeves, LEDs melt the cooper circuits!Phil. Quote Link to post Share on other sites
SiCaln Posted October 25, 2007 Share Posted October 25, 2007 ah didnt kno that, cheers man sleeves it is Quote Link to post Share on other sites
Idrees Posted October 25, 2007 Author Share Posted October 25, 2007 Yup sleeves FTW, mine are LEDs.... for now! Quote Link to post Share on other sites
Nanglebadger Posted October 26, 2007 Share Posted October 26, 2007 all my circuits were melted within 3minutes TOPS!!!! dont ask me why because the LED bulbs i used had built in resistors!!!! nothin quite so unsettling as seein a wee puff of grey smoke appear out from behind your stearing wheel!!!!!!SLEEVES PEOPLE SLEEVES!Phil. Quote Link to post Share on other sites
SiCaln Posted October 26, 2007 Share Posted October 26, 2007 has anyone gone this route yet? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.