DennisV Posted November 2, 2013 Share Posted November 2, 2013 HiToday i got a greddy emanage blue biut I dont want to wire it on the oem cables. Anyone got a plug and play harness for this? I all ready found 1 but its around $ 229 excl shipping costs. Maybe someone has one or can someone give me more info on the wires. Which one goes where. On TGTT is something but he didnt map it and writes he is not sure.Any help would be nice. Greets DennisV Quote Link to post Share on other sites
Flaminsam Posted November 4, 2013 Share Posted November 4, 2013 Hey, I made my own field harness but it was for a ep82. Just bought a ecu from scrap yard and cut the plugs and wiring out of the loom. Then soldered all the wires and wired in the emb harness. Saves cutting into the original wiring on the car. Il see if I can find some pictures. Quote Link to post Share on other sites
DennisV Posted November 4, 2013 Author Share Posted November 4, 2013 HiThanks mate that would be nice. I dont want to start with this without enough information so pics would be nice.Thanks againDennisV Quote Link to post Share on other sites
TrisK Posted November 4, 2013 Share Posted November 4, 2013 HiThanks mate that would be nice. I dont want to start with this without enough information so pics would be nice.Thanks againDennisVZisco make field extension harnesses alrwafy Quote Link to post Share on other sites
DennisV Posted November 4, 2013 Author Share Posted November 4, 2013 Nice will take a look at those maybe I can start with that. Now I have to find out which wire goes where. Quote Link to post Share on other sites
WallaceGlanza Posted November 4, 2013 Share Posted November 4, 2013 Nice will take a look at those maybe I can start with that. Now I have to find out which wire goes where. The wiring diagram on tgtt.com is correct.... Quote Link to post Share on other sites
DennisV Posted November 4, 2013 Author Share Posted November 4, 2013 Aaaah nice thank u for sharing with me. Well I'm going toMake me a one myselve now. Thanks guys for the info. This is just what i neededThanks againDennisV Quote Link to post Share on other sites
rmsnoel Posted November 7, 2013 Share Posted November 7, 2013 I straightened the first row of pins to give move room to solder then rebend them. You could do in a few hours if your sanity held up Quote Link to post Share on other sites
DennisV Posted November 8, 2013 Author Share Posted November 8, 2013 Look at that. Ehm I think I have to relax first I am not a person who have much patience hahaha. Thank u for the pics it helps me a lot Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.