I want my car to sound exactly like this !

[daniel_g]

Lol, hows the V anyway Socks ? No updates in a while.

[PAUL7]

  On 12/5/2013 at 9:11 PM, Socks said:

Could just try fitting it properly

Same car running a tad more boost:
>http://www.youtube.com/watch?v=Er3v51QEUrI

Skimmy, have a perv thru the build thread if you are wondering about spec...

is this your car??

[Socks]

  On 12/6/2013 at 7:58 PM, daniel_g said:

Lol, hows the V anyway Socks ? No updates in a while.

Its good mate...

Updates will flood in after xmas/over winter

  On 12/7/2013 at 9:11 AM, pm_glanza said:

is this your car??

It is indeed mate.

[Skimmy237]

What makes this exhaust sound so good? What's do different about it ?

Is it just down to you running big power?

[PAUL7]

selling ? lol

[Tmdep82mos]

Your new car sounds just like this mate.

Many thanks mosley

[GlanzAndy]

  On 12/5/2013 at 10:21 PM, goldenvtr said:

mine used to sound similar untill i changed from a ball bearing to a journal bearing turbo (bad move but its bigger lol)

 

5e vf28 at 18psi with no air filter and external wastegate V.T.A

 

 

That sounds insane!

[akaye4000]

Ha thats my glanza he's passing in the first video:)

[Chris_GlanzaV98]

Its down to hard work and alot of money everyone likes an exhaust to sound good but when i put an exhaust on my car its for performance the fact it sounds good is just another pro from going for big power i would love my bc spec 2 on there forever but sadly its choking up power and ill struggle to make 350hp with it tbh

Limiter banging doesnt mean a car is forged lol, save the cash up and get it forged that way you will be able to go for big power

[daniel_g]

I thought a BC spec 2 was about the least restrictive backbox there was lol, considering its pretty much a wider pipe and not actually a box at all haha.

[AdamB]

The BC is only a 2.5 inch pipe diameter though isn't it?

[daniel_g]

Change it to a 3" then, and keep the backbox ??

Pretty much all the JDM systems come with 2.25 - 2.5" front/mid sections.

[Chris_GlanzaV98]

bc is a 2.25 really not a true 2.5 it does get wider at the tail but only 2.5 at the tail, its is very free flowing but more width is needed sad to say, when i come to sell it soon it will make someone really happy

[Skimmy237]

But your more than likely to blow a standard engine up just smashing it off the limiter ? No?

[Chris_GlanzaV98]

most cars can take a bit of a beating at high revs before they will blow up, a rev limiter is there for a reason, they wont go bang as soon as it bounces, i struggle for trasction in first and second and if i keep the foot flat it bounces for a while and it hasnt done any damage, dont normally hammer it mind you but the few times ive kept it flat its been fine and will continue to be fine

[Skimmy237]

Aw I thought they would go bang

[Chris_GlanzaV98]

granted mines is forged but even on a standard engine it wont blow up straight away lol

[daniel_g]

5 mins later then ^^ lol, just bare in mind that FTEs are fuckin chocolate haha.

[Chris_GlanzaV98]

lol tbh daniel my starlet barely gets drive its done like 1000 since june haha

i dont drive it fast either i enjoy cruising in it, fte engines are fragile to a point, but to set the record straight i am in no way condoning smashing the limiter in your car skimmy lol

or better still just dont wack the limiter, makes you look like a bam

[Skimmy237]

I havnt hit the limiter atall in my car, was just saying it's likely to go bang

[Chris_GlanzaV98]

more than likely

[Bussey]

Valve stem seals don't really get on with the limiter either from what I've heard

[Skimmy237]

Yea haha best to just drive normal and not destroy an engine

[Ryan-11]

I love hitting the limiter

[Skimmy237]

  On 1/25/2014 at 11:08 AM, Ryan-11 said:

I love hitting the limiter

Haha can't beat limiter