jamesh Posted August 12, 2014 Share Posted August 12, 2014 (edited) Can any one tell me if this is sitting ok or not. I have mounted it but seem to hang low on the side if you look at the picture. Edited August 12, 2014 by jamesh Quote Link to post Share on other sites
H_D Posted August 12, 2014 Share Posted August 12, 2014 (edited) Its not sitting correctly and neither are the lights,Looks like the car has front end damage for the lights not to line up and the bumper to hang low. Edited August 12, 2014 by H_D Quote Link to post Share on other sites
ForgedV Posted August 12, 2014 Share Posted August 12, 2014 Worth bearing in mind that replica's never fit correctly anyway, a lot of members have found that with id workz items, no offence intended.... Quote Link to post Share on other sites
jamesh Posted August 12, 2014 Author Share Posted August 12, 2014 My old bumper sat properly so can't be any front end damage. This bumper is an original varis one. Quote Link to post Share on other sites
Zeldoz Posted August 12, 2014 Share Posted August 12, 2014 Probably the mounts. The OEM 98 spec slots under the lights. Mine never sat right when i bought my old glanza. But, after abit of fathing with the lights and when i put it on/off a few times i got it right... Unsure if an orginal VARIS is the same. But might be worth trying to lift up and push in under the lights slightly? Quote Link to post Share on other sites
jamesh Posted August 12, 2014 Author Share Posted August 12, 2014 I will give that a go later on today. But I think the mounts under the lights are lower then they should be will see if I can adjust them some way Quote Link to post Share on other sites
H_D Posted August 12, 2014 Share Posted August 12, 2014 just look at the way the indicator sits next to the headlight its not straight its obviously had a hit before. Quote Link to post Share on other sites
jamesh Posted August 12, 2014 Author Share Posted August 12, 2014 (edited) No the indicator bracket snapped where you screw it on to the body I had to use a zip tie to keep it in place Edited August 12, 2014 by jamesh Quote Link to post Share on other sites
Glanza Mac Posted August 12, 2014 Share Posted August 12, 2014 My rep Varis sit the same Rob. Quote Link to post Share on other sites
jamesh Posted August 12, 2014 Author Share Posted August 12, 2014 Yours looks like it sits better than mine by the looks of your pic. Quote Link to post Share on other sites
Glanza Mac Posted August 12, 2014 Share Posted August 12, 2014 Nah its about the same buddy Rob. Quote Link to post Share on other sites
jamesh Posted August 12, 2014 Author Share Posted August 12, 2014 I had a play around and got it to sit alot better. The mounts where low so I bent them up. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.