Jump to content

Recommended Posts

thats the gen2 4efe so stick to 8 psi to be safe mate , just weld oil return to existing sump source a 4efte thermostathousing for water feed to ct9 also 4efte sensors must be adapted to your current manni or swap over to 4efte manni and tb

you can keep using the na clutch for a while till you can sours 4efte clutch fly

also this is a must knock sensor MUST be tapped in the block and fitted

if you want to keep your rolla loom then repinning is required and some wires added for knock external coil/igniter ait sensor because i think rolla does not have it

you need 4efte dizzy to and wires layed in your loom to run it

i think it easyer to fit complete v loom

Edited by 5e colin
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...