ashep91 Posted February 4, 2015 Posted February 4, 2015 I seriously need some help I have a ksport 6 pot brake kit with the bigger 286mm discs on my glanza I want to change the alloys for rota grids I got the template from ksport and drift works say theu wont fit due to the length of tge caliper catching at the ends am sure last year I seen someone who had these wheels 15" rota grids over this brake kit with 20mm spacers I just want advice if its correct I could go 16" but I would rather not as I may meed to adjust my varis wings to get 16" wheels on Quote
Glanza Mac Posted February 4, 2015 Posted February 4, 2015 I believe the 15x7j rota grids fit over with no spacers, or it could of been 5mm spacers :-) Rob. Quote
Mad Mike EP82 Posted February 4, 2015 Posted February 4, 2015 You will need to get the correct offset my team dynamics only just fit et35 15" 7j. Et30 or lower would be better. Quote
ashep91 Posted February 4, 2015 Author Posted February 4, 2015 I believe the 15x7j rota grids fit over with no spacers, or it could of been 5mm spacers :-) Rob.I thought this but need to know for sure mate Quote
ashep91 Posted February 4, 2015 Author Posted February 4, 2015 You will need to get the correct offset my team dynamics only just fit et35 15" 7j. Et30 or lower would be better.If I go for 7" rim width its et40 and 8" is et20 but the 8" would stick out a lot am guessing? ? Quote
Jamie_VF22 Posted February 6, 2015 Posted February 6, 2015 (edited) ET40 will not fit i had to use 5mm spaces with my willwoods 4 pots and it was super tight fit still You will need an ET28 to fit over K-sports with NO spaces Edited February 7, 2015 by Jamie_VF22 Quote
ashep91 Posted February 6, 2015 Author Posted February 6, 2015 I spoke to the guy at rare rims and gave him the brake kit template and they reckon 15" 7"wide will fit with 5mm spacers Quote
Mad Mike EP82 Posted February 6, 2015 Posted February 6, 2015 Don't run spacers. Buy wheels that fit team dynamics pro race 1.2 15" 7j et35 fit no spacers 👍 Quote
AdamB Posted February 6, 2015 Posted February 6, 2015 Agree with Mike, just buy wheels that fit the first time round, I'm not a fan of spacers either. Quote
ashep91 Posted February 6, 2015 Author Posted February 6, 2015 Do you think any wheel that are 15" 7j et 35 will fit? I dont really like the look of the team dynamic pro alloys is there anything else similar to rota grid so 5 spoke they do which will fit? Quote
Mad Mike EP82 Posted February 6, 2015 Posted February 6, 2015 Do you think any wheel that are 15" 7j et 35 will fit? I dont really like the look of the team dynamic pro alloys is there anything else similar to rota grid so 5 spoke they do which will fit? I only know team dynamics fit because that's what I've got 😎 Quote
ashep91 Posted February 6, 2015 Author Posted February 6, 2015 Ok mate I might have to have spacers as I have varis fenders they are wider Quote
akyakapotter Posted February 7, 2015 Posted February 7, 2015 I'm looking at getting a set of ksports my wheels are 6.5 wide no idea what the offset is but looking at my design of wheel I may pull it off just about. Quote
mattyD Posted February 7, 2015 Posted February 7, 2015 If I were you, get a smaller caliper! I never found ksports any better than wilwoods etc and the caliper is fucking huge Quote
akyakapotter Posted February 7, 2015 Posted February 7, 2015 If I were you, get a smaller caliper! I never found ksports any better than wilwoods etc and the caliper is fucking hugeMy minds already made up lol just need to see if I'll need a slight spacer Quote
DevonGT Posted February 7, 2015 Posted February 7, 2015 You'll probably have to use spacers, not many 15's fit over ksports. Quote
mattyD Posted February 7, 2015 Posted February 7, 2015 You need to measure the internal diameter of the wheel and measure the length of the caliper from top to bottom....thats the issue, not really the fact the caliper is to wide Quote
ForgedV Posted February 9, 2015 Posted February 9, 2015 Compomotive M05's fit over them without spacers, I used to run them before I had some spacers made up for my Toms New Actions Quote
ashep91 Posted February 9, 2015 Author Posted February 9, 2015 What were the exact spec of the alloys you ran please did you have the ksport 6pot brake kit with the bigger discs? Quote
ForgedV Posted February 9, 2015 Posted February 9, 2015 I only ran them for a week or two from a while my spacers were machined, he no longer owns them so chances of him remembering are slim was a couple of years back now, sorry mate Quote
akyakapotter Posted May 2, 2017 Posted May 2, 2017 Any of you no if the pro race 3s will fit over 15x7 et30?Cheers nick. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.