Turk Posted February 23, 2015 Share Posted February 23, 2015 Ive just wired in my emanage blue and all is going well. Ive seen a few people talking about wiring in an afr into the manage blue to data log and even use the auto tune function. I just wanted to know if there was any solutions to a diy harness. Or something cheap as im on a budget. Also any help with the auto tune function will help ThanksTurk Quote Link to post Share on other sites
turbo Grant Posted February 25, 2015 Share Posted February 25, 2015 I've looked into it slightly. Something I plan to do with the emu. From what I seen you can hook up the 5v signal wire from a wide and controller using a shaved down R/C car plug Quote Link to post Share on other sites
JayJ Posted February 25, 2015 Share Posted February 25, 2015 Then I needed a harness for my AEM UEGO wideband as I want to use it for data logging with EMU. Greddy sells the harness, but the price is quite high, so I bought Futaba servo extension cable that is used in R/C cars. You have to cut a small edge off from the plug and it will fit perfect. (already cut on the pic below) Quote Link to post Share on other sites
Ollieh17 Posted February 25, 2015 Share Posted February 25, 2015 i did a quick google after reading this as i was interested in finding out a bit more. Some good links and info on here: http://board.tercelonline.com/viewthread.php?action=printable&tid=38677 especially the newcelica link Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.