GlanzaRye Posted March 11, 2015 Share Posted March 11, 2015 Currently got 4 of the water pump nolts out and im struggling like hell to remove the 5th one which (I THINK) is located underneath the engine mount..Can anyone give me a few tips or suggestions to make this a little easier, cheers Quote Link to post Share on other sites
russ78 Posted March 12, 2015 Share Posted March 12, 2015 put a jack underneath the engine and remove engine mount, you will need to lower engine a little with the jack from memory to get to the last bolt Quote Link to post Share on other sites
GP82 Posted March 13, 2015 Share Posted March 13, 2015 As above but i also had to remove the crank pulley, both timing belt covers. Edit: this was for a GT. Quote Link to post Share on other sites
tommyep82 Posted March 14, 2015 Share Posted March 14, 2015 You can take the hole housing off from the rear held on by 3 12s i think,I loosened the alternator as well, Quote Link to post Share on other sites
JayJ Posted March 17, 2015 Share Posted March 17, 2015 (edited) You can take the hole housing off from the rear held on by 3 12s i think,I loosened the alternator as well, Just noticed today, that my water pump seal is seeping a little bit from the top of the pump. Can you remove the pump and the housing easily just by loosening the alternator? Should it be done from under the car? This sounds easier than removing the engine mount and lowering the engine to get the access to the pump bolts. EDIT: I have Glanza if it makes the difference. Edited March 17, 2015 by JayJ Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.