Danz_ep95 Posted March 11, 2015 Posted March 11, 2015 Hi all ... Does anybody knw if na uk starlet rear struts will fit on 4door 4 paw Quote
daniel_g Posted March 11, 2015 Posted March 11, 2015 Yeah they will fit, use the 4paw top mounts. Although the EP91 struts are physically longer i think, so the ride hight might be even worse. Quote
Danz_ep95 Posted March 12, 2015 Author Posted March 12, 2015 I'm looking just to lower it from the rear Quote
daniel_g Posted March 12, 2015 Posted March 12, 2015 Pretty difficult to lower a 4paw at the rear lol, ive got 40mm springs on mine and its still high as fuck.You can get a set of EP91 coilovers, wind them all the way down and see what its like.Other people have modded coilovers to fit, and also modded the strut tower, although im not 100% on whats involved.Other option is the Meister 4paw coilovers. Quote
Scoobysvx Posted March 12, 2015 Posted March 12, 2015 I hoping to have my meister fitted this weekend and I can post a picture to give you an idea of the ride height for you?I'd imagine they will still be fairly high as there brand new and wouldn't have settle down at all yet Quote
bucketep91 Posted March 12, 2015 Posted March 12, 2015 I have bc coilovers on mine(from a fwd starlet) they sit a wee bit high still. But I can live with it! Quote
richglanzav Posted April 1, 2015 Posted April 1, 2015 Just to make you aware i bought the meister coilovers for mine and while the quality of them is top notch it still wouldnt go low enough at the back. Looked uneven Quote
richglanzav Posted April 1, 2015 Posted April 1, 2015 But that was 2012 they may have revised them since then. Quote
daniel_g Posted April 1, 2015 Posted April 1, 2015 But that was 2012 they may have revised them since then.I think they have but would be good to see conformation from Meister. Quote
Scoobysvx Posted April 1, 2015 Posted April 1, 2015 I think they have been changed...Here's how mine sits now, I haven't adjusted them from meisterAnd I've got at least an inch and a half left to go Quote
daniel_g Posted April 1, 2015 Posted April 1, 2015 Looks like that would sit pretty well Did you get the panhard rod modded to make it adjustable. Quote
Scoobysvx Posted April 1, 2015 Posted April 1, 2015 I haven't tackled that just yet. When I was speaking to jerrick about it he suggested fitting the coilovers first and then doing it if it was necessary.I presume there not the same as ep91 ones right? Quote
daniel_g Posted April 1, 2015 Posted April 1, 2015 I haven't tackled that just yet. When I was speaking to jerrick about it he suggested fitting the coilovers first and then doing it if it was necessary.I presume there not the same as ep91 ones right?Nah they are a good bit shorter, ideally get a Glanza or GT adjustable one and get it cut down to size. Quote
daniel_g Posted April 1, 2015 Posted April 1, 2015 Mean 4paw panhards are a good bit shorter than GT/Glanza ones. Quote
Scoobysvx Posted April 1, 2015 Posted April 1, 2015 Yeh understood, better that way round though tbh Quote
interloper393 Posted January 21, 2016 Posted January 21, 2016 Anyone know how much longer the glanza standard shocks are over the ep95 ones? I'm raising the rear turrets but do you need to raise the fronts too?Cheers Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.