Glanza1996 Posted April 11, 2015 Share Posted April 11, 2015 (edited) So I have brought some light bulbs Full Dial ClusterHeater Panel (Not Switch)Total: 8 Bulbsbut im not sure what goes were help please.. Do I just change the green ones? Edited April 11, 2015 by Glanza1996 Quote Link to post Share on other sites
FrozenJakalope Posted April 11, 2015 Share Posted April 11, 2015 The green ones are the dial lights, quarter twist and they just pop out. The black ones are for the warning lights if you wanted to change those as well. Quote Link to post Share on other sites
Glanza1996 Posted April 13, 2015 Author Share Posted April 13, 2015 Cheers did think that I changed them but they dont work for some reason Quote Link to post Share on other sites
FrozenJakalope Posted April 13, 2015 Share Posted April 13, 2015 Did you try rotating them 180 and putting them back in? Hashtag LED problems. Quote Link to post Share on other sites
Glanza1996 Posted April 13, 2015 Author Share Posted April 13, 2015 Yeah I did that I managed to get 1 to work and went out this morning to have another little look and now that 1 doesn't work :/ Quote Link to post Share on other sites
FrozenJakalope Posted April 13, 2015 Share Posted April 13, 2015 That's strange that one worked and now doesn't. You'd think an earthing or switching problem would affect all or none. Quote Link to post Share on other sites
Glanza1996 Posted April 13, 2015 Author Share Posted April 13, 2015 Circled in red does this plug into anywere as I cant see anything for it dunno if that could be the problem. Quote Link to post Share on other sites
Glanza1996 Posted April 15, 2015 Author Share Posted April 15, 2015 Okey so I have tried about everything know I have even tried my old bulbs and they dont work either now Does that earth cable need to go anywere :/ anyone got any ideas... Do I need to have the speedo cable plugged in for them to work or should they just work with the 3 plugs connected :/ Quote Link to post Share on other sites
Calum122 Posted April 15, 2015 Share Posted April 15, 2015 I have done this on my EP82 with no problems quite recenty. So if everything is plugged in correctly then ther eshould not be any problems. I definitely did not have an earth wire. Well infact I was just using Indiglos. Quote Link to post Share on other sites
FrozenJakalope Posted April 15, 2015 Share Posted April 15, 2015 I did this too a few months back, also didn't have that Earth. Maybe try running some speaker wire or some such from it and earthing to chassis whilst everything's out, whack the plugs back in and see if it works while everything's out? Never know with these cars what other people have done under the dash before you got there. You definitely don't need the speedo connected though, tested mine with that out and it all worked. Quote Link to post Share on other sites
Glanza1996 Posted April 16, 2015 Author Share Posted April 16, 2015 I have managed to get the fuel gauge bulb to work now just none of the others. Im thinking its maybe a faulty batch of bulbs so waiting on some new ones now. Ill keep you posted on how I get on. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.