fordie_glanzaV Posted July 12, 2015 Share Posted July 12, 2015 Hi, correct me if I've posted in wrong sectionGot myself a saxo pas pump..It came with a mounting bracket which doesnt seem to fitAs u can see from the pictures the bracket seems far to big for the pump..Any suggestions?Also if anyone has got any picures of how they have mounted the pump and ran the lines to the pump will be much appriciatedCheers lewis Quote Link to post Share on other sites
fordie_glanzaV Posted July 12, 2015 Author Share Posted July 12, 2015 (edited) Also 2 more pics Edited July 12, 2015 by fordie_glanzaV Quote Link to post Share on other sites
maddox710 Posted July 12, 2015 Share Posted July 12, 2015 I used long piece of threaded bar and wrapped it round the pump then drilled holes above fir the bar to go through but honestly if you have you alignment bag on you won't need it. It just makes the steering dangerously light Quote Link to post Share on other sites
fordie_glanzaV Posted July 12, 2015 Author Share Posted July 12, 2015 Im gunna have to make a bracket up at this rate. As the 1 that came with it is miles to big?What u class as the alignment bag mate? Quote Link to post Share on other sites
maddox710 Posted July 12, 2015 Share Posted July 12, 2015 I ment bang on. Damn spell correct shitYeah if you're alignment is out it makes the steering heavy like I found out after I had it re done again it's not even bad it's only parking when it's at slow speeds its a little heavy but mines not daily so I don't give a shit Quote Link to post Share on other sites
fordie_glanzaV Posted July 12, 2015 Author Share Posted July 12, 2015 Haha.Yeh alignment will all be done when car is complete and see's the road. I preffer cars with no power steering. But like u say its a cock when parking. And as its a daily and the misses uses it.Im only relocating it to tidy the bay up.. Heard its no different to the original pas? Quote Link to post Share on other sites
maddox710 Posted July 12, 2015 Share Posted July 12, 2015 Mine was a fair bit lighter Quote Link to post Share on other sites
fordie_glanzaV Posted July 12, 2015 Author Share Posted July 12, 2015 Reckon u could put it on a switch? Quote Link to post Share on other sites
maddox710 Posted July 12, 2015 Share Posted July 12, 2015 Yeah mines on a switch under steering column. Make sure it's a switch that can take over 30amp Quote Link to post Share on other sites
fordie_glanzaV Posted July 12, 2015 Author Share Posted July 12, 2015 Ok cheers mate.. Need to sort wiring out next cus stuff that got sent is hacked.. Quote Link to post Share on other sites
maddox710 Posted July 12, 2015 Share Posted July 12, 2015 I'm taking mine off it's just 10kg over the front Axle for no reason Quote Link to post Share on other sites
fordie_glanzaV Posted July 12, 2015 Author Share Posted July 12, 2015 Oh really.. What lines u using? Custom lines or the old toyota 1s? Quote Link to post Share on other sites
Mad Mike EP82 Posted July 12, 2015 Share Posted July 12, 2015 (edited) Your bracket is missing rubber inserts that's why it doesn't fit. Edited July 12, 2015 by Mad Mike EP82 Quote Link to post Share on other sites
fordie_glanzaV Posted July 12, 2015 Author Share Posted July 12, 2015 Oh that would explain alot.. Think im gunna have to try make something up... Quote Link to post Share on other sites
maddox710 Posted July 12, 2015 Share Posted July 12, 2015 I just used half toyota half shitreon Quote Link to post Share on other sites
fordie_glanzaV Posted July 12, 2015 Author Share Posted July 12, 2015 Ahh i see. Ill see how i get onCheers for your help. Quote Link to post Share on other sites
Ollieh17 Posted July 12, 2015 Share Posted July 12, 2015 Were the rubber brackets not with it mate? I might have them somewhere Quote Link to post Share on other sites
fordie_glanzaV Posted July 12, 2015 Author Share Posted July 12, 2015 No mate no rubber brackets Went about fitting it today but couldnt work out the bracket. Lol Quote Link to post Share on other sites
Rob H@RCH Engineering Posted July 12, 2015 Share Posted July 12, 2015 Why would you need a 30a switch? If its powered through a relay like it should be you just need a switch in the relay trigger wire that can be any normal size switch. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.