jayc-glanza17 Posted October 11, 2015 Share Posted October 11, 2015 I b popping in to colin thursday..Sure he say had'a starlet in on saturday'lol..If they mention jay its me buddy..What boost is that figure at Quote Link to post Share on other sites
turbo-fever Posted October 11, 2015 Author Share Posted October 11, 2015 Yer me and bussey was there for a rolling road day. Only at 1bar on td05 and 5e setup wanted to make sure everything is running as it should. Pretty much ready for more boost now Quote Link to post Share on other sites
jayc-glanza17 Posted October 11, 2015 Share Posted October 11, 2015 Didnt know there was a rolling road day on sat..sounds like a good base to start..Got get mine down their next year once built. Quote Link to post Share on other sites
turbo-fever Posted October 12, 2015 Author Share Posted October 12, 2015 One of me pals set it up wasnt anything specific, would like to get atspeed to map it but they only do standalone Quote Link to post Share on other sites
jayc-glanza17 Posted October 12, 2015 Share Posted October 12, 2015 Haha..Omex or aem they love hence y colin maps mine.Im down their every couple weeks..Know them for years.. Quote Link to post Share on other sites
turbo-fever Posted October 14, 2015 Author Share Posted October 14, 2015 Bored so I thought i might as well upload the daily driver and the other half's car not jap but still brilliant carsMk2 20v I built for the gf, must say I do like these cars This is the daily 435d m sport and for a diesel shifts quite well so much torque Quote Link to post Share on other sites
turbo-fever Posted November 7, 2015 Author Share Posted November 7, 2015 Well got some new rims to fit this weekend and as soon as the front wheel went on I discovered there was a problem. Having the twin pot celica brake setup the grid v's which are 15x7 et20 catch the caliper by quite alot. I need like a 10mm spacer but then the wheel sticks out past the arch by a lot !I could get into flaring the arches but then how do i get rest of bodywork to sit nice, so looks like I'm on the hunt for a different set of wheels ! Been after these for ages only to find they don't fit lol Quote Link to post Share on other sites
turbo-fever Posted April 3, 2016 Author Share Posted April 3, 2016 Update coming soon :Tdo5 billet and emerald !Plus a few other little bits Quote Link to post Share on other sites
turbo-fever Posted April 8, 2016 Author Share Posted April 8, 2016 Turbo is back fully rebuilt billet wheel and up rated journal bearing booked in for mapping on the 18th at redline Quote Link to post Share on other sites
turbo-fever Posted April 10, 2016 Author Share Posted April 10, 2016 (edited) Having to change to dastek unichip as no one local will map the emanage ultimate so will be up for sale shortly Edited April 10, 2016 by turbo-fever Quote Link to post Share on other sites
turbo-fever Posted May 21, 2016 Author Share Posted May 21, 2016 Redline got cancelled and so did the dastek so here is little sneak peak of what's coming Quote Link to post Share on other sites
jiggaman_16 Posted May 21, 2016 Share Posted May 21, 2016 oooooooooo do tell the ECU Quote Link to post Share on other sites
turbo-fever Posted May 21, 2016 Author Share Posted May 21, 2016 All will be revealed in a few days ! Quote Link to post Share on other sites
starletezy Posted May 21, 2016 Share Posted May 21, 2016 Cage looking good! finally got my one in after modifying it pain in the back side it was lol Quote Link to post Share on other sites
turbo-fever Posted May 21, 2016 Author Share Posted May 21, 2016 Cage looking good! finally got my one in after modifying it pain in the back side it was lolCheers dude Haha I still keep hitting my head need to lower my seats lol Quote Link to post Share on other sites
starletezy Posted May 21, 2016 Share Posted May 21, 2016 Haha same mate lucky enough I have the protective foam there to cushion it Quote Link to post Share on other sites
turbo-fever Posted May 21, 2016 Author Share Posted May 21, 2016 Still need to get some just can't find any green padding Quote Link to post Share on other sites
starletezy Posted May 22, 2016 Share Posted May 22, 2016 Think i have seen some green ones on ebay mate Quote Link to post Share on other sites
Ethanep82 Posted May 23, 2016 Share Posted May 23, 2016 Redline got cancelled and so did the dastek so here is little sneak peak of what's coming Setting it up all yourself the COP? Quote Link to post Share on other sites
turbo-fever Posted May 23, 2016 Author Share Posted May 23, 2016 I managed to find someone up north a little who supplies fits and maps something else Quote Link to post Share on other sites
Ethanep82 Posted May 23, 2016 Share Posted May 23, 2016 I managed to find someone up north a little who supplies fits and maps something else Ah no worries, good luck, she's gonna be beast! Quote Link to post Share on other sites
turbo-fever Posted May 29, 2016 Author Share Posted May 29, 2016 (edited) Finally picked the car up today have had some issues though. Firstly the rad I had bought off ebay from someone who said worked fine didn't fit and leaked when we did get it to fit was not impressed so had to use old one. Then we thought I needed a stiffer spring to get more boost turns out the spring had snapped as you can see lol. So the good news after fitting my billet td05 16g i had an EMUMASTER standalone ecu fitted with k20 coil plug conversion and nissan gtr throttle position senso. Using standard cam sensor. Managed to find another spring so could get it mapped to 1 bar making 248 at the wheels but when I get stiffer spring in few weeks going back up for more tweeks and 1.6 bar. Plus had rolling anti lag fitted which does help being td05 even though I get a full boost by 4300rpm which is quite good considering before the billet i didn't get full boost till 5000rpm. Launch control fitted aswell. Will upload some more pictures soon car needs a wash first. Got to recommend rrr engineering near peterborough cracking ECU much better alternative to the greddy emu and dastek Edited May 29, 2016 by turbo-fever Quote Link to post Share on other sites
Bussey Posted May 29, 2016 Share Posted May 29, 2016 Yes Neil! Quote Link to post Share on other sites
richardc9052 Posted May 29, 2016 Share Posted May 29, 2016 You know we need to see antilag videos. Congrats on the ecumaster too seems people are starting to take notice! Just because they are cheaper than everyone else doesn't mean they are shit!!!! Actually better than quite a few. Quote Link to post Share on other sites
turbo-fever Posted May 30, 2016 Author Share Posted May 30, 2016 Will try and hook the go pro up and get a video. Yes they are a brilliant bit of kit which do so much and uses all original sensors. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.