dan106 Posted August 10, 2015 Share Posted August 10, 2015 Could anyone tell me if the gaps behind the driveshafts and the chassis are the same both sides while the car has weight on it?Have got more caster on the passenger side it think, wanted to see if it's normal or if I do have a bent armOr something underneath My driver side has hit in the past, might of been ruined engine mounts, not sure, I hadThe car laser aligned (again) and it turns out Kwikfit left it toeing out 30 degrees both sides, which explains why it always wandered and was generally all over the place. Quote Link to post Share on other sites
adzy Posted August 10, 2015 Share Posted August 10, 2015 Check your top mounts are the same way around? Have seen a few starlets were they were opposite give different castor for each wheel.I assume you mean it was 3 degrees out? Lol Quote Link to post Share on other sites
dan106 Posted August 10, 2015 Author Share Posted August 10, 2015 (edited) The top mounts are the same way round, it was wandering before i fitted the coilys anyway, sorry had a retarded moment, not even 3 lol! Before After Edited August 10, 2015 by dan106 Quote Link to post Share on other sites
daniel_g Posted August 10, 2015 Share Posted August 10, 2015 That is measured in degrees and minutes, theres 60 minutes in a degree, so the NS has nearly 1degree of caster, the OS has slightly more than half a degree.To me that alignment is pretty bang on.If you want to adjust caster get an anti lift kit fitted Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.