kbond Posted January 19, 2016 Posted January 19, 2016 I've had AN10 fittings welded on to make a race spec rocker cover and had to remove the baffle plate underneath to clean any metal and dirt underneath, but how have people secured the baffle back in place?CheersKeiran Quote
Ollieh17 Posted January 19, 2016 Posted January 19, 2016 Drilled the revits out. The tapped and bolted them on with loctite Quote
kbond Posted January 19, 2016 Author Posted January 19, 2016 That's what I have started doing just wanted to see what others were doingCheers Quote
adzy Posted January 19, 2016 Posted January 19, 2016 I'm going to drill and tap mine, then tack weld the head of the bolt to the baffle so It can't come loose. Quote
Scoobysvx Posted January 20, 2016 Posted January 20, 2016 I went for the welding option but it's quite difficult as the rocker cover is soft ally compared to the stanless baffle. Can still be done though Quote
Ollieh17 Posted January 20, 2016 Posted January 20, 2016 I tried welding mine but used the wrong wire then gave up. Tapp and bolt means you can clean it out again Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.