starlet-glanza-v Posted February 20, 2016 Share Posted February 20, 2016 Hi all, wondering if anyone can help me, my glanza is idling just over 1500rpmI've checked all hoses off the inlet manifold can't find any leaks at allWhat could be causing this high idling? Quote Link to post Share on other sites
Johnboy GT Posted February 20, 2016 Share Posted February 20, 2016 Adjusted the idle screw on your inlet? John Quote Link to post Share on other sites
starlet-glanza-v Posted February 20, 2016 Author Share Posted February 20, 2016 Hi pal, I've done that low as it can go now still high idling Quote Link to post Share on other sites
starlet-glanza-v Posted February 20, 2016 Author Share Posted February 20, 2016 (edited) If I put rear demister on, lights and hold electric window button brings in down to just over 1000rpm Edited February 20, 2016 by starlet-glanza-v Quote Link to post Share on other sites
starlet-glanza-v Posted February 20, 2016 Author Share Posted February 20, 2016 Idle control valve is clicking too, when I unplug it doesn't drop the revs but the clicking stops Quote Link to post Share on other sites
fiddlersport Posted February 20, 2016 Share Posted February 20, 2016 vacuum leak ? Quote Link to post Share on other sites
starlet-glanza-v Posted February 20, 2016 Author Share Posted February 20, 2016 Couldn't find any leaks off the hoses, I'll give them another look tomorrow.. which ones you think are best to check first?? Quote Link to post Share on other sites
daniel_g Posted February 20, 2016 Share Posted February 20, 2016 1.5k is not that bad.Most starlets have odd idles.Idle will be higher normally in the cold weather. Quote Link to post Share on other sites
Ollieh17 Posted February 20, 2016 Share Posted February 20, 2016 Best thing i ever did to my glanza was removed everything that was meant to 'help' it idle. Had to hold the throttle for a minute or two but after that idled spot on Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.