ChrisLeeBoost Posted March 7, 2016 Share Posted March 7, 2016 Anyone have any links to an online service manual for ep91 turbo.. Need tourque settings for head bolts and general head gasket replacement info! Cheers lads Quote Link to post Share on other sites
patman Posted March 7, 2016 Share Posted March 7, 2016 http://www.toyotagtturbo.com/forums/showthread.php?27569-4EFTE-Torque-Specs Quote Link to post Share on other sites
ChrisLeeBoost Posted March 7, 2016 Author Share Posted March 7, 2016 Thanks patman your a gentleman! Quote Link to post Share on other sites
patman Posted March 7, 2016 Share Posted March 7, 2016 Your welcome Chris 👍🏻 Quote Link to post Share on other sites
ChrisLeeBoost Posted March 7, 2016 Author Share Posted March 7, 2016 So stage one is first turn then stage two is second turn and third is a 90 degree turn ? Quote Link to post Share on other sites
patman Posted March 7, 2016 Share Posted March 7, 2016 Yes mate but let's just see what others post first to be on the safe side here, don't forget to do it in the right sequence, NOT tightened them 1-10 Quote Link to post Share on other sites
patman Posted March 7, 2016 Share Posted March 7, 2016 http://www.ukstarletowners.com/page/articles.html/_/engineandtuning/4e5e-torque-settings-r13 Same on this link too Quote Link to post Share on other sites
ChrisLeeBoost Posted March 8, 2016 Author Share Posted March 8, 2016 cheers mate I'm dreading the thoughts of doing the head gasket it seems daunting to say the least! Just the timing is confusing me a tad Quote Link to post Share on other sites
patman Posted March 8, 2016 Share Posted March 8, 2016 Yeah I know what you mean mate, there are guides about though to help you through 👍🏻 Quote Link to post Share on other sites
5e colin Posted March 8, 2016 Share Posted March 8, 2016 you can get the hayes manual for the rolla 4efe al torques are in there make sure the threads are clean torque to 22nm ( untill the wrench clicks then 44 now you use tipex and mark every bolt at 12 oclock now you can ad your 1/4 turn to them and look at the headbolts if there facing passo side Quote Link to post Share on other sites
ChrisLeeBoost Posted March 8, 2016 Author Share Posted March 8, 2016 Thanks a lot lads appreciate the help! Will pull head off the weekend! Will it 100% have to be skimmed? Just to be safe like? Quote Link to post Share on other sites
5e colin Posted March 8, 2016 Share Posted March 8, 2016 not always needed use a steel ruler to check straitnes Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.