Sportif 4efte Posted September 9, 2015 Author Share Posted September 9, 2015 After an Intercooler front kit if any one got one (td04 fitment) Quote Link to post Share on other sites
Rich-k Posted September 9, 2015 Share Posted September 9, 2015 Great progress mate!! Quote Link to post Share on other sites
Sportif 4efte Posted September 10, 2015 Author Share Posted September 10, 2015 Great progress mate!!Thanks rich mate Quote Link to post Share on other sites
Sportif 4efte Posted September 30, 2015 Author Share Posted September 30, 2015 (edited) Hi all,Here is a list i created when i was doing my n/a to 4efte swap. It will help all you guys that are planning to do your swaps in the near future. If there is any thing that needs adding please let me know . My personal most important thing was a decent set of tools. The last thing you want to happen is to have to get some to take you tool shopping halfway through because you haven't got something. Close second was telephone numbers. Helped me massively.You will need:Engine liftA good trolley jackAxle standsLots of cardboard to lie on or a car creeperEngine Oil (if it hasn't already got it)Gearbox oilCoolantA good set of toolsA 4EFTE engine & ECUAn n/a & turbo loom made or a Glanza engine & interior loom with the dashThe 4EFTE power steering pipeA few of you to do itTelephone numbers of people who can give advice or helpLots of patienceTo Do:Remove oil Remove coolant Remove gearbox oilRemove radiatorRemove exhaustRemove Speedo cableRemove accelerator cableRemove petrol linesRemove gearbox hydraulic line and clamp up.Remove gearbox cablesRemove power steering pump feedRemove battery and bracketRemove brake vacuum pipePull Amplifier power cable into car (if you have one)Remove ECUPull old loom out of interiorRemove old sensor on firewallRemove bonnetRemove bumperJackup and place car on axle standsRemove front wheelsRemove drive shafts from diffHook up engine lift and tightenUnbolt engineLift out engineClean engine bayDrop 4EFTE inJack up gearbox into postionBolt in and remove liftPut drive shafts inFill gearbox with oilFit gearbox cablesFit petrol linesFit gearbox hydraulic line and bleed it.Fit power steering feeds to pump.Fit brake vacuum pipeFit radiatorFit FMIC or TMICFit BOV or block off BOV holeFit radiator pipesFill radiator with coolantFit exhaust systemFit Speedo cableFit accelerator cableFit 4EFTE ECU Plug in Loom to interiorFit amplifier power leadFit MAP sensorFit coil packFit bumper Fit bonnetFit wheelsJack car off StandsRemove axle stands and lower carFit batteryRemove the injector connectors Turn keyLet it turn over for a few secondsConnect injectors back upStart engine and smile Sportif 4efte Edited September 30, 2015 by Sportif 4efte Quote Link to post Share on other sites
Ollieh17 Posted September 30, 2015 Share Posted September 30, 2015 Did you get a td04 front mount? I have one? Quote Link to post Share on other sites
Sportif 4efte Posted September 30, 2015 Author Share Posted September 30, 2015 Did you get a td04 front mount? I have one?Mate do require it jus on a tight budget atm depends how much u want and if u got sum pics mate what's app them to me..pm'd you cheers... Quote Link to post Share on other sites
Sportif 4efte Posted October 17, 2015 Author Share Posted October 17, 2015 Few updated pics... Quote Link to post Share on other sites
Sportif 4efte Posted December 4, 2015 Author Share Posted December 4, 2015 Out with old Loom in with new... Quote Link to post Share on other sites
Sportif 4efte Posted December 4, 2015 Author Share Posted December 4, 2015 Jobs to-do..Require half size civic radiator brackets to hold and install in place..coolent hoses. and that hdi intercooler that's on way soon. Quote Link to post Share on other sites
Sportif 4efte Posted April 21, 2016 Author Share Posted April 21, 2016 Few pics to update.. Quote Link to post Share on other sites
Rich-k Posted April 21, 2016 Share Posted April 21, 2016 Looking mean dude!!! Quote Link to post Share on other sites
Sportif 4efte Posted April 25, 2016 Author Share Posted April 25, 2016 Looking mean dude!!! Thanks mate, Got her started for 1st time today, turbo looks bit nackerd but fired up beautifully!! Quote Link to post Share on other sites
Sportif 4efte Posted May 14, 2016 Author Share Posted May 14, 2016 (edited) updated Edited May 17, 2016 by Sportif 4efte Quote Link to post Share on other sites
aarzlp Posted May 16, 2016 Share Posted May 16, 2016 Looks well that dude ! Cant wait to see the finished product. Quote Link to post Share on other sites
Sportif 4efte Posted May 17, 2016 Author Share Posted May 17, 2016 (edited) Looks well that dude ! Cant wait to see the finished product. Thanks mate, need to get my indicators sorted then brake lines going for bridgstone glow in dark braided lines..should look good at night when cars rolling.. >https://www.youtube.com/watch?v=tFov7DXsZ00 Edited May 19, 2016 by Sportif 4efte Quote Link to post Share on other sites
aarzlp Posted May 20, 2016 Share Posted May 20, 2016 That would look sick as. rolling with a glow ! Quote Link to post Share on other sites
Sportif 4efte Posted May 28, 2017 Author Share Posted May 28, 2017 Right after a years messing around finaly got a complete loom..will update in a week or so... Quote Link to post Share on other sites
RoryWebb432 Posted August 6, 2017 Share Posted August 6, 2017 Where are you located mate? Quote Link to post Share on other sites
Georgehburroww Posted August 27, 2017 Share Posted August 27, 2017 Mint project mate sounds great Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.