nikhilkamdar12

Hi bud, Sorry but I will only be shipping in the UK due to the size and awkward shape of the bumper, plus the higher risk of it getting damaged by shipping that far. Thanks Nikhil

Hi mate, Yep Side Skirts, End Cap and ECU are still here, I also have brand new ID Dynamics 1000cc injectors that I still need to list. Ping me a DM and we'll chat, tried to DM you but won't let me for some reason! Thanks Nikhil

.

I'll ping you, still available and in Borehamwood, Hertfordshire.

Responded bud

Unfortunately I got rid of the complete chassis, I would personally check a breakers yard for that. Thanks Nikhil

Hi mate, updated the listing, rear tail lights and front set of fogs are now sold. FYI the Glanza rear lights will fit any EP91 chassis Thanks Nikhil

Hi mate, it is, but have already got rid of the chassis and many other parts, was there anything in particular you were looking after that wasn't listed above?

Hi guys, I have a large amount of Glanza parts I'm sure is willing to go to a good home as I need to make space and looking to buy a house of my own! The full list of parts are listed here with prices and images. I can post any parts at additional cost or collection is welcome from the Borehamwood, Herts area: Haltech IQ3 Display Dash. This goes hand in hand with the Haltech ECUs, Elite series or others in their range and uses a single cable for connectivity. Since this is a Haltech variant of the IQ3 dash and not the regular Racepak IQ3, the difference is that the Haltech one has the built in Haltech CAN protocol (v1 and v2), this is what allows the single cable communication. I was running this dash for a very short time before breaking the car as I now have other commitments but its an incredible dash with F1 style LEDs for your rev counter, gear indicator and many other programmable options! Any information from the Haltech can be sent to the IQ3 dash for displaying the information, so no more gauges everywhere, you can have oil pressure, engine temps, exhaust temps, etc.. If you want to use this in true 'Standalone mode' you can use the RacePak VNet modules to read various engine/chassis metrics. £550 £500 £400 Please DM me for any shipping quotes or if you would like any parts, hope to see them go to a good project to make an amazing car! Thanks Nikhil

Hi mate, I have but unfortunately it does not give a true reading when timing up the engine. It does flash, but apparently it has a tendency to drift etc.. So want to get a true reading using an old HT lead to get the timing bang on.

Just need an old one for setting my timing on my standalone. As I have COP setup only accurate way. Threw away my old ones :(

Hi guys, In need of an old HT lead ASAP for the 4EFTE? Just the one if anyone has it lying about? Please just drop a PM Many thanks Nikhil

Bump..... Must be a TB with a 4 pin TPS out there

Hi everyone, Does anyone have an auto 4EFTE throttle body with the 4 pin TPS? (variable resistance type) Need this quite quick Thanks Nikhil

Pay it mate, no way of getting round it, its a tax like many others that you will eventually have to pay

My bad mate, didn't see your post! Both will work

I presume from what you have said above the printer is not a LAN printer and just connects via a lead to the PC. It does not matter if the 2 PC you are using is a Linux box or Windows box providing the correct drivers are installed. You can achieve what you want with some like this... https://www.amazon.co.uk/USB-2-0-Manual-Switch-Peripherals/dp/B005LMX0IG/ref=pd_cp_computers_0 But if a LAN printer you can just share across network and job done Nikhil

The Glanza is almost ready back for the road and to get another map! Pic before I took it off the road read for the new turbo kit, uprated ARP headbolts, TD uprated valve springs, head rebuild and a port on the exhaust side. Front and rear crank seals have both been replaced as they were leaking after mapping. Got the head off and down to the the machine shop for a rebuild and an exhaust port. Has been matched with the gasket size... Head off, surface cleaned up and new Athena gasket placed down with ARP headbolts. Head bolted back up Good as new Where I stand now... Pretty much everything bolted up, just need a new headlight as the clip has snapped, new engine oil, engine coolant, exhaust fitted up and ready for mapping hoping for 370hp+

Hi mate thanks for the info, if I have any questions I will be sure to get in touch

bump

bump

bump

Close. Sorted.

Hi guys, Looking for a Glanza driver side headlight with no snapped clips etc...decent condition. If you have a pic, upload an image so I can have a look Thanks Nikhil

Hi guys, Looking for a lower 4EFTE timing belt cover. No cracks and decent condition. If you have a pic, if you could pop it up so I can have a look. Thanks Nikhil