nikhilkamdar12

Got the car back from the tuners but not mapped yet, as had to finish of a few bits here and there around the car. Will hopefully be going back this week to get mapped and have a nice figure attached to it. Had a few issue with the engine being tight as I cranked it by hand with no plugs in but hooked it all up nevertheless and once cranked over all seems to be fine now. Car as it stands now... Need to make a dash surround/backing to mount the RackPak dash Neat job of ECU tucked away and just a comms cable for mapping Interior shot Front car shot, had to cut

Hi mate, Thanks for the info, I will give this a go tonight and see if it solves the problem and update you guys. If not, then as you say may require a new motor. Cheers Nikhil

Hi mate, I have tried this yesterday. I basically took off both wipers. Switched it on and off but just looking at the splines you can see the wipers will end back in the middle of the screen. If you put the wipers on the spline where they are meant to be when mine are switched off, switching them on, they will be wiping the water off the bonnet lol. I think this is what you have meant? Unless I have misunderstood Thanks Nikhil

Hi all, Need a bit of help getting my wipers working again as normal. So... 1) My wiper motor is working 2) It HAS been fully out the car, wiper linkages, motor, etc... 3) It wipes the windscreen as normal BUT when switching them OFF they return not to the bottom of the windscreen as normal but direct of my line of view. Now I believe this happens when you take out the wiper linkages, etc... but I don't know how to 'reset' them? I have googled how to do this but it is not very clear on how to do it. I'm sure it is very easy but I can't seem to see how these people are 'resett

Hi mate, Not the part in the actual housing of the cluster but the main black plastic you have to remove if you want to take your dials out. Cheers Nikhil

Hi all, In need of an Glanza plastic cluster surround? If anyone has one lying about they don't need?? Thanks Nikhil

Very true, just already have everything for a Glanza ready to go, but at the right price I may go for it, lets see

Hi all, Very long shot, but anybody have for sale an EP91 Glanza rolling shell with a full welded in roll cage for sale, gussets and the lot? I see a EP82 shell for sale currently and that would be perfect for me but shame it's not a Glanza! Thanks Nikhil

Drop it on some coilovers that would finish it off, other than that very clean EP2 Or if you want to do the full works a K20 turbo swap That would be cool!

Good updates mate, kept them coming )

So my car is at the tuning company getting finished off, bit of welding, wiring up engine and mapping... Front bar getting re-done and brackets getting made up for radiator and intercooler Easily removable with a few bolts... And finally everything bolted up and starting on the wiring... Should be finally up and running in the few coming weeks with a nice figure attached to this

Damnn if I wasn't getting other things done to my car, I would take this right now! Very good LSD and price!

Good work mate! Also what TIG welder you got, looking to buy one?

Looks really good mate, job well done!

Cheers mate Exactly this. I want the parts ticking over and not on the limit all the time, my theory is if its built specifically and slightly over spec'd for it should last that little bit longer. Apart from the gearbox though lol Cheers buddy. Yeah their reps from ID Workz. So when you get them and fit them up the fitment is beyond shit. Takes a bit of filing and sanding but you can get them to fit bang on if you take the time defo worth the buy!

Ohhh yes, planning for the future as well

Quick update, got my forged engine last weekend and plumbed it up. Things in the fuel department are getting quite serious lol got myself a brand new Walbro 255 fuel pump and these little beasts... Injector Dynamic 1000cc, no fueling problems in my build! Stay tuned more good stuff coming soon

***SOLD PLEASE LOCK***

Tell me about it, been 2 years believe it or not!! Will be done real soon Be boosting all over the place lol

PM'd

Cheers mate, defo will if need any help bro Going tuners soon so need to get all this done asap. Hopefully next weekend will get finished off.

Got the sandwich plate painted up in high temp black paint Got the gearbox painted up fully, quite happy with how it turned out Flywheel and 6 Puk clutch fully bolted up also Gearbox now bolted up to the engine and next week will be going into the car Just waiting for my ID1000cc injectors to turn up and fully tighten everything up on the motor.

Hi guys, Is the EP91 clutch master cylinder the same as the EP82 one? Interchangeable? Thanks Nikhil

Hi mate, Still using this myself buddy. Nikhil

Hi mate, I would like to say yes but not 100% certain, maybe someone on here could confirm that it's compatible with an EP82? Nikhil