Jump to content

vizzioarts

Member
  • Content Count

    316
  • Joined

  • Last visited

Posts posted by vizzioarts

  1. hi sorry for posting this im a bit confused are the wiring pictures above of module a ,b, and c already had the wiring swapped around to make the sr clocks work as im following the instructions of moving them from one to the other but some seem to not have wires where they should be on the pictures

    for instance take c5 and move to c6 there is no wire in the pic above for c5 but theres a brown wire in c6 am I looking at this wrong as im counting the wires from left to right or should I be counting them from right to left

    In hindsight it should have been explained better by myself. The wiring tables are the dials circuit boards. Therefore if you trace the wiring on the back of the dials, each pin will correspond to that function on the clocks. The two dial circuits are wired slightly differently.

    The pictures are just a reference to show my wiring before i moved any of them (reference for myself too, to put it back to standard). In theory, if your module wiring looks identical the ones in the picture it will work.

    And yes sorry, the modules seem to be flipped in these pictures.

    i.e. C5 to C6 will be the brown and white wire, to the empty space beside it.

    Hope this helps, any other questions just ask :thumbsup:

  2. 1. AlancEP82

    2. Starletburkie

    3. Chrisgreen1993

    4. Starlet_15

    5. Sheehy StarletGT

    6. Starlet SR

    7. glanzav98

    8. Seba

    9.Shadow

    10.Ryan_EP82 GT

    11. rmsNoel

    12. corofin12345.. boost town

    13.John GT

    14.robep91

    15.Jayjayktm

    16. monty1991

    17. Nanglebadger

    18. Browner

    19. FrancyGlanza

    20. Vincent

    21. JonnyEP91

    22. DaddyDutch

    23. PudgeyMac

    24. Phil

    25. Mernagh

    26. Grum-Glanza

    27. Thunderpants is back and modding :)

    28. Greenmachine81

    29. Vizzioarts

×
×
  • Create New...