Sandham

Clip type pal. And will do mate, ill keep the thread updated.. Really appreciate the help

Ive reduced the gap to 0.9 and its helped abit but still just some slight hesitation occasionaly. I did notice one of my spark plugs had a tiny amount of oil on the top half so maybe its that? It never crossed my mind to be honest Also id be after both parts mate because i dont know which is at fault

You got paypal mate? And does it deffo work?

Passed a sniff test this afternoon so thats crossed off. Will try my coil next

Hi my oil light has not come on with ignition this morning.. Is it likely to be the bulb? Its always worked previously

Im gonna have a sniff test done tomorrow for peace of mind and will also drop my gap to 0.9

Plugs are gapped to 1.1mm from the box, do you think it would be worth dropping the gap a slight amount?

Hi ive been strugling with a misfire and some hesatation for some time now, running a td04 under fuel cut at stock fuel pressure.. So far ive changed the plugs, fitted trd leads, a brand new oem king lead, new dizzy cap and a new rotor arm. However im still experiencing the problem. Its very random and intermittent and seems to go when at very small amounts of throttle or wide open throttle :/ Im struggling for ideas now and would really appreciate some help

Sound, think im gonna give this a go at some point

What modifications do the fronts need to fit the topmoumts pal?

Thats the inlet, play feels minimal aswell.. No in and out and very little side to side. ive got an apexi super intake and a relocation but i cant seem to get it to fit inbetween the slam panel and fmic

Im running a meshed td04 so maybe chipped blades could be a possibilty

Hi, recently ive started hearing a whining noise when im accelerating but the noise goes when on mid to full boost and holds boost well (td04 ext. gate) doesnt smoke or have any other problems. Any suggestions?

Luckily dont have a full time one lol sounds just like one though

Hi, recently ive started hearing a whining noise when im accelerating but the noise goes when on boost and holds boost well (td04 ext. gate) doesnt smoke or have any other problems. Also ive just done the clutch and the input shaft and the rest of the box all seemed good. My alternator belt was squeeling for a while and i tensioned it the other day and the noise has gotten worse since then, just looking for some advice as im thinking it could be my alternator bearing? Any suggestions?

Ok let me know

Dibs on the gt badge awaiting pics

Pmd both

Anyone on here?

After a clutch as my release bearing is dead, also a good condition king lead rotor arm and dizzy cap.

Got a sard one mate

Cant fault my stack gauge for its pure simplicity and ease to read while driving! Looks really neat and clean also

No worries paypal have refunded me my money, will be posting the ecu back tomorrow. Micky boy has been very understanding of the issue however so i dont want this to be interpreted as bad feedback as i would still deal with him in a breath if needs be

It was sold to me with the seals broken "tested working" by a member on here with good positive feedback.. I havent done anything with it other than plug it into my car.

Yeah the starting issue turned out to be plugs... I bought it like that i wouldnt know what i was looking at if i did open one lol! Ill try get a multi meter to do the map sensor and ill ask on tgtt also didnt think of that chris