Pete_A

Thanks, but i only want the carriers

As above, i brought the wrong size discs might aswell use em. What you got?

Good look, this one should evolve rapid!

proper gutted for you

As above really, i know its cold but when i first start the car the revs sit at 2k for 3-4 mins, it did it when it was hotter but not for quite aslong. Is there just something that just needs to cleaned? Or just live with it? Thanks in advance.

Dont know if its just me, but what with these darker mornings & nights its amazing the amount of muppets that drive around with their full beam on. And having a small and lowered car people seem to like driving right up your arse making driving funkin difficut. So i like to play: IS IT A PEUGEOT? Rules: When someones right up your derriere blinding you (its normally a Peugeot) so i re`arrange my rear view mirror till ive refocused the dazzling blindingly bright light to the front middle of the car behind (you know, the badge area) you can see... IS IT A PEUGEOT? But you have to

Pop to maplins and get a box of spade connectors

Love it, some gold wheels would set it off

? Do you have some?

As above, one or a pair of front gt seats, can collect anywhere round brum, anyone?....

Ooosh. TTT

Boom. TTT

Afternoon all, as above, anyone got a front seat or seats with rails any where around the west mids/brum area? i dont want to spend loads, ta

Cheers. Thats what i thought, slightly concerned about the width. If i can get them for the right price ill post the results

Nissan pulsar seats fit an ep91? Are they a close fit? Any help appreciated

Ive (had lot of help) wnd replaced the rear shoes but they are catching slightly. Am i right un thinking i take the wheel off and adjust/loosen the shoes via a hole in the rear of the hub? Cheers

Cant believe how frikin small the nuts are!

Mornin all, as above. Peace out

Hello, where are you mate? How much for nearside wing and the door locks with key?

Awesome cheers. I've a father in law/mechanic on hand. I meant really are there different sizes.

I need to replace my rear brake shoes before i go get some are there any variants? Or does one size fit all? And whats the torque setting for the rear hub nut? Cheers in advance

Ive just turned my spare wheel upside down (so not to b without spare!) And cut a disc of mdf that fits proper snug in the wheel rim/lip and have a component set in there, sound great, looks rough but i dont tend to look

Welcome. My mates from the dominican, i know why you have big gates!! nice ep

I cant help you but will congratulate you, you english is better than most, english.

Amazing, cant thank you enough. Worth a note though just how bloody annoyingly hard the removal and refit of the speedo cable is though. I found once all the screws were out i gently but assertively pulled the clocks straight towards me and the cable detached. To re-attach the cable i put all the screws and cables back into the unit and then removed the piece of plastic/dash from under the steering wheel, there's a piece of air vent/ducting that can be removed and you can gain access to the rear on the clocks enough to push the speedo cable/clip back quite easily and nicely, there are howe