Jump to content

mike_flan#23

Club Member
 View Profile  See their activity

  • Content Count

    86

  • Joined

  • Last visited

 Content Type 

Everything posted by mike_flan#23

  1. mike_flan#23
    My airbag light is staying on I have tried new clock spring and different airbags and resistors still no luck (97 glanza) can't take bulb out due to local test failure anyone had similar issues?
  2. mike_flan#23
    Il take that down pipe then and get details pmd to you
  3. mike_flan#23
    Messaged about downpipe
  4. mike_flan#23
    Messaged you about bumper mate
  5. mike_flan#23
    Just fitted corolla inlet on starlet really bad misfire burning oil slightly and really bad wine any advice would be much appreciated
  6. mike_flan#23
    Just wondering if anyone had done one on an na (96 ep91 sportif) Tia
  7. mike_flan#23
    Just wondering what people have used is it possible using a glanza carrier to run bigger discs and pads? Calipers look similar
  8. mike_flan#23
    How have people fitted them into headlight seeing as there is no cap to drill and insert
  9. mike_flan#23
    To fit na preferably jap can and not much mod needed thanks in advance
  10. mike_flan#23
    Surely if you get the glanza carriers calipers are needed as well?
  11. mike_flan#23
    Anyway way you could box it up and I have it picked up by courier mate?
  12. mike_flan#23
    Front if possible mate
  13. mike_flan#23
    Would you post to isle of man mate?
  14. mike_flan#23
    Thanks in advance
  15. mike_flan#23
    Glanza rear beam bushes fit a na starlet sportif? Two front main ones attaching beam to chassis thanks
  16. mike_flan#23
    Il take one 3" if still open
  17. mike_flan#23
    Just wondering if anyone had tried this as my na has no revmeter
  18. mike_flan#23
    Long shot but anyone tried this? Just my na starlet has no rev counter
  19. mike_flan#23
    Noticed my starlet is idling quite high due to not installing a revmeter yet I can't be specific I'd say above 1800rpm
  20. mike_flan#23
    Needed if anyone can help the one that plugs in and then slots into headlight
  21. mike_flan#23
    N/s headlight adjuster to fit na ep91 needed
  22. mike_flan#23
    ^ (and wiring if possible)
  23. mike_flan#23
    How have people ran their harnesses and does anyone recommend a bar or brace etc? Thanks
  24. mike_flan#23
    Any others about?
  25. mike_flan#23
    Thinking of putting a set off springs on an ep91 na do you have to change the 'panhard rod' and if so anything else? Thanks
×
×
  • Create New...