EP70-PT

Wow some serious JDM points on that find man! Love Standard Glanzas

Anyone has ever experienced this?

Anyone?

Bump

tried it, it's on the video xD all the wires are good in the car so my only hope is changing the tacho... The needle is moving without even starting the engine ahah

BUMP

Solved

Tested it with a 9V battery, does the exact same thing as in the car... https://youtu.be/cSlatiBQdVY

But all the rest works as it should mate...

So, everything works, just my tacho is acting stupid... https://youtu.be/PNxopJTmspA

Lookong for a set of these, the ones that are a direct swap on the N/A's! Need the tacho circuit as mine's gone....

They won't work with indicators...the earths are fine..

Not the grounds.... I should maybe say that my battery is low (7v), can it be a relay??

What I said... I'm tired of this sh... Even my tacho needle goes up when I turn my key without even starting the engine... Heeeelp

How do I remove the rods on these????

Did you put the cable in???

Anyoooone???

Problem solved, headlights ON had a switched ground, had to do a separate circuit for the HIGH BEAM on the paseo clocks... Something a bit like this: ALL GOOD NOW! Thanks guys

Problem solved, headlights ON had a switched ground, had to do a separate circuit for the HIGH BEAM on the paseo clocks... Something a bit like this: ALL GOOD NOW! Thanks guys

Maybe my actual relay is gone too... No?

Need to find a wire that has 12v when the high beams are on.. My N/A clock wiring doesn't go well with the paseo clocks,I don't have the same wiring as other people that did the conversion here for some reason... My high beam indicator is on when lights are off, off when low beam is applied and dimmed on high beamm.. Idk why it stays on when the lights are off so I need to find another source for it...

Well indicators are sorted, put number 2 pin to ground, all other bits work too, just my high beams are screwing me... High beam is on all the time and turns off when I turn them on, tested it with thz multimeter and it's 12v all the time but as soon as I flick the high beam switch, it goes to 0V... I don't remember my stalk being defective

They're on all the time, as soon as I plug the 10 pin plug (where the indicators wire are)

Yes ahah it's really weird... It was late though so it didn't help

Yeah, been thinking about it, some head scratching this... Apparently LHD's aren't the same as RHD's